Operation
Filling with water
1.Push down on the safety cap while turning counter clockwise.
2.Fill measuring cup to the max fill line.
3.Slowly pour water into steamer.
4.Replace the safety cap by pushing down while turning clockwise.
NOTE: You may substitute distilled or demineralized water for tap water.
If your tap water contains a high level of mineral content (hard water) the use of distilled or demineralized water is recommended.
Do not add anything except cool water or you will cause damage to the heating element and void your warranty.
Power cord
Unwrap power cord before operating unit.
Indicator light
The red indicator light will go on when the unit is first plugged in. When the steamer is ready to use, the light will turn off.
Steam trigger
Push to release steam.
Remove protective packaging from nozzle and extension hose prior to use.
CAUTION:
Always unplug your Steam Shot before filling/refilling. Press trigger until Steamer depressurizes. Wait 5 minutes before removing cap.
1.2.
3.4.
CAUTION:
Before disconnecting a tool from the steam cleaner, make certain that steam is no longer coming from the nozzle. Use an oven mitt to remove tools, or wait until they cool before removing.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1 | 5 |
10/14/08 12:56:05 PM |
