Operations

Power cord

The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.

Power button

Turn the power ON or OFF by pressing lightly downward on the power button ( ).

Automatic Cord Rewind Button

Automatic cord rewind

Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button OFF ( )and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically.

CAUTION:

Be careful to avoid injury as cord retracts very quickly.

Variable suction power control

The variable suction power control is located on the top of the vacuum. Turn the control toward the larger dots for maximum suction. Turn the control toward the smaller dots to minimize suction for lightly soiled areas or delicate fabrics.

Power

Variable Suction

Button

Control

caution:

Before using your vacuum, make sure that the dust bag and all filters (pre-motor and post-motor) are in place. Do not operate your vacuum without the dust bag and filters.

6 w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Page 6
Image 6
Bissell 4122 warranty Power cord, Power button, Automatic cord rewind, Variable suction power control, Button Control