Operations
Cleaning with flexible rubber contour nozzle
The CleanView Deluxe comes with the rubber contour nozzle already attached. This attachment is great for vacuuming up pet hair, stair cleaning, upholstery, and many other uses.
Cleaning with hose attachment and tools
1.Turn hand vacuum OFF (O).
2.Remove flexible rubber nozzle by pressing down on round nozzle release button.
3.Replace with hose adapter nozzle by lining up the bottom of nozzle to the bottom of the dirt container. Pivot upwards to snap into place.
4.Make sure the nozzle has snapped securely into place before using.
5.Attach the flexible hose to the hose adapter nozzle. Choose the tool appropriate for your cleaning job and attach to the end of the hose.
Emptying the dirt container
Empty the dirt container after each use. A full dirt container may reduce suction or performance of vacuum.
1.Turn hand vacuum OFF (O).
2.Unplug hand vacuum from electrical outlet.
3.Press dirt container release latch down to disconnect dirt container and filter assembly from the unit.
4.Remove filter by grasping tabs on both sides of filter frame and pulling away from the dirt container. For best results, periodically tap filter assembly against trash can to remove dirt that has collected on the screen and filter.
5.Empty dirt into trash can.
6.Replace filter assembly by aligning side labeled “TOP” into top of dirt container. Grasp filter tabs and press firmly to ensure filter assembly is secure in dirt container.
NOTE: Make sure side of filter assembly labeled "TOP" faces outward when inserting filter assembly into dirt container.
7.Reattach dirt container to unit by aligning bottom of dirt container to bottom of unit. Pivot upwards and snap into place. Use one hand to hold the unit and use the other hand to clip the dirt container securely in place.
2.3.
5.
ATTENTION:
For best performance, dirt container and filter assembly should be cleaned after every use.
3.4.
5.6.
7.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1 | 5 |
