Bissell 5200 warranty Product features, Gentle Clean Pad is intended for use, Body of the unit

Assembly

1

Assembling your new BISSELL Flip-It is a simple

2 step process:

NOTE: Remove clean tank from unit first.

1.Insert the handle into the top of the unit, making sure the spray trigger is on the wet vacuum side. Make sure the screw opening in the handle is aligned with the hole in the housing of the unit.

2. Insert screw; gently screw in until tight with the 2

body of the unit.

Warning:

Do not plug in your cleaner until you have completely assembled it per the following instructions and operating procedures.

Product features

Included with the purchase of your Flip-It are the following Specialized Cleaning Accessories:

1. The Gentle Clean™ Brush is recommended for use on hard floor surfaces such as tile, vinyl, slate or surfaces that have grout or crevices where dirt and grime collect.

2.The Gentle Clean™ Pad is intended for use

on more delicate surfaces such as sealed hardwood, laminates or vinyl.

3.The Pleated Filter, located in the lid of the

dirty tank should be cleaned periodically.

w w w . b i s s e l l . c o m

Warning:

To reduce the risk of fire, use only BISSELL Hard Floor Solutions in your Flip-It. Use of cleaning formulas that contain lemon or pine oil may damage this appliance and void the warranty. Chemical spot cleaners or solvent based soil removers should not be used. These products may react with the plastic materials used in your Flip-It causing cracking or pitting.

5