![](/images/new-backgrounds/1062163/6216323x1.webp)
Maintenance and care
Replacing the | 2. |
The
1.Unplug the vacuum from electrical outlet.
2.Remove the filter door (located on the back of the vacuum) by pushing down on the tab and pulling out and away from the vacuum.
3.The
4.Replace the filter door by placing the tabs on the bottom of the filter door into the notches on the bottom of the
Clearing clogs from the dirt cup
1.Unplug the vacuum from electrical outlet.
2.Remove the dirt cup from the vacuum, following steps
3.Remove the dirt cup filter assembly from the dirt cup, following step 2 of Clean the dirt cup filter on page 10.
4.Tap the dirt cup filter assembly over a garbage container to remove any dirt or debris from the dirt cup filter screen that surrounds the dirt cup filter.
5.Reach up into the dirt cup to clear any dirt or debris from the dirt cup.
6.Check to see if there are any clogs in the suction inlet.
7 . After clearing any dirt or debris from the dirt cup, replace the dirt cup filter assembly back in the dirt cup following step 8 of Cleaning the dirt cup filter on page 10.
12 w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5