Attach Vacuum Hose and Tools Continued
4.Slide the Extension Wand and the Crevice Tool together into the storage clip on the side of the vacuum.
5.Snap the Combination Tool into the storage clip on the back of the vacuum.
How To Use Your Vacuum
Handle Positions
Press the Handle Release Pedal with your foot to place your vacuum in one of three cleaning positions.
1.Upright- For storage and above floor cleaning with tools.
2.Normal Cleaning- Press Handle Release Pedal once. Use for most household floor cleaning tasks.
3.Low Cleaning- With the vacuum in normal cleaning posi- tion, press Handle Release Pedal again. Use for reaching under low furniture such as tables, chairs or beds.
Height Adjustment
The Powerfoot/Rotating Floor Brush can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.
1.Place Handle in Upright Position.
2.Turn Height Adjustment Knob to desired setting.
Lowest Setting | For bare floors. |
Medium Settings | For short and medium |
| pile carpets. |
Highest Setting | For plush pile carpet. |
3.Place the Handle in the normal cleaning position and the Powerfoot will adjust to the setting chosen.
NOTE: You may also adjust the setting while in the normal cleaning position.
6
CAUTION:
Before using your vacuum, make sure that the Dirt Container is in locked posi- tion and that all filters (Inner Circular, Outer Circular,
Tip:
Before cleaning under low furniture, check area first for objects that might harm the unit or block the Vacuum Hose.
Tip:
Your vacuum features a Quick Release Cord Wrap. To remove the Power Cord quickly and easily, rotate the Upper Cord Wrap towards floor, and slip Power Cord from Upper and Lower Cord Wraps.
