Bissell 3920, 6750 warranty Empty dirt container, Maintenance and care, thoroughly before replacing

Maintenance and care		2.
Empty dirt container
The dirt container needs to be emptied when the
dirt reaches the “Full” line on the container.
1.	Unplug the vacuum from electrical outlet
2.	Slide the Lock ‘n Seal Lever to the “Unlock”	Unlock
	position.
3.	Grasp handle and pull the dirt container	4.
	straight out to remove from the vacuum.

4.Empty dirt into garbage container.

NOTE: Emptying the dirt container after every use will help prevent over filling and ensure that the vacuum is ready to go the next time you clean.

Cleaning the pre-motor and post-motor HEPA media filter				Post-Motor
1. Unplug the vacuum from electrical outlet.				HEPA
				Media
2. The pre-motor filter protects the motor				Filter
from dirt particles. It is located in the
slide out tray underneath the dirt
container. If the filter becomes dirty, pull
out the tray, lift out the foam filter pad
and clean it.
NOTE: The pre-motor filter may be
hand washed in cold water with mild	Washable
detergent. Rinse well and air dry	Pre-Motor
thoroughly before replacing.
	Filter
3. The post-motor HEPA media filter
assists in the filtration process to
return clean air to the room. It is
located behind the door on the side
of the vacuum. If the filter becomes
dirty, open the door, remove the filter
and replace.			WARNING:
white, pleated HEPA media filter. This
NOTE: The post-motor filter is a
filter is not washable and must be			Do not operate cleaner
		with damp or wet filters or
replaced when it becomes dirty.
		without all filters in place.

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1 11