Storage Position
Located at the top rear side of the vacuum cleaner, there is a nozzle support that can be used to park the nozzle during pauses in cleaning.
For easy storage and transportation, there is a nozzle support on the back of the vacuum cleaner in the vertical position.
Troubleshooting
Motor Does Not Start.
Possible Causes
1No power supply
WARNING:
To reduce the risk of fire, electric shock or injury, unplug from outlet before servicing.
Remedies
1Check cord, plug and socket.
Decreasing Suction Or No Suction.
Possible Causes
1Filter, Floor Nozzle, Suction Hose or Extension Wand is blocked.
2Dust Bag is full.
3Closure tab on Dust Bag may be covering the Inlet Suction.
Remedies
1Remove each part and check for blockages.
2Replace with new Dust Bag.
3Make sure closure tab on Dust Bag is properly folded back.
Cord Does Not Rewind Fully.
Possible Cause | Remedies |
1 Check that the cord is not twisted or wound unevenly. | 1 Gently pull the cord out and push down on the |
| cord rewind. |
Replacement Parts
You may purchase replacement parts from your retailer, by calling BISSELL Consumer Services or by visiting our website. To locate a retailer near you, or to place an order using Visa, Mastercard, Discover or American Express, call:
BISSELL Consumer Services |
|
| |
1 | 2 | 3 | |
Monday - Friday | 8 a.m. — 10 p.m. ET |
|
|
Saturday | 9 a.m. — 8 p.m. ET |
|
|
Or visit our website - www.bissell.com
Item | Part No. | Part Name |
1 | Dusting Brush/Crevice Tool | |
2 | Floor Nozzle | |
3 | Suction Hose/Handle | |
4 | Extension Wand | |
5 | Telescoping Extension | |
|
| Wand - Chrome |
6 | Tool Storage Clip | |
7 | ||
8 | ||
9 | Replacement Bag (5 pack) |
4 | 5 | 6 |
7 |
|
| 8 |
| 9 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7