www.bissell.com 800.237.7691
7
Operations
1A 1B
Getting ready
The mop pad may have already
come attached to the flip head, if
not follow steps 1A and 1B below.
1. Attach mop pad
A. Insert the flip head into the open end
of the mop pad.
B. Secure the Velcro flaps to ensure the
pad is on tighty.
2. Fill the water tank
A. Remove tank by lifting straight up
and away from unit.
B. Unscrew cap at bottom of water tank.
C. Fill water tank with water. For best
results, water should be at
room temperature.
d. Replace the cap, tighten until snug.
E. Replace water tank by gently sliding
tank into place.
3. Twist the quick release cord wrap clock-
wise to unwrap the power cord com-
pletely and plug into a 120-Volt outlet
as described on the Important Safety
Instructions, page 3.
4. The indicator light will illuminate when the
Steam Mop Select is plugged in.
2A
2d
2B
2E
Tip:Use of distilled water is recommend-
ed to prolong the life of your Steam
Mop Select