www.bissell.com 800.237.7691
7
Operations
Power button
Turn the power ON or OFF by pressing
lightly downward on the power button
( ).
Variable suction power control
The variable suction power control is
located on the back of the vacuum.
Turn the control toward the larger
dots for maximum suction. Turn the
control toward the smaller dots to
minimize suction for lightly soiled
areas or delicate fabrics.
Air flow regulator
Open the air flow regulator by
sliding the regulator back towards
the handle to an open position.
This will reduce the suction power
for vacuuming delicate fabrics.
For full suction power, close the air
flow regulator by sliding the regulator
forward to the closed position.
CAUTION:
Before using your vacuum,
make sure that the dirt
container and all filters
(pre-motor and post-motor)
are in place. Do not operate
your vacuum without the dirt
container and filters.
Variable Suction
Control
Power
Button
Tip:Use the variable
suction power
control and the
air flow regulator
to reduce air flow
as needed when
using the tools.