
Operations
Carpet cleaning
1.Plug the deep cleaner into a proper outlet. Set ReadyTools dial to the Floor Cleaning setting. Turn the power on by pressing the red power switch on the back of the unit with your foot. Turn heater switch (located on side of unit) to the on position. Allow one minute for the
NOTE: The Heathly Home Fresh Clean will be fully warmed and will provide optimal performance after one minute of continuous heated cleaning.
2.With your foot, press the gray handle release lever located on the back of unit below water tank to detent handle.
3.While pressing the spray trigger, make one slow forward wet pass and another back. Let the
4.Release the spray trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying.
5.Repeat cleaning passes until solution being suctioned up appears clean. Continue passes without pressing the spray trigger until you can’t see any more water being suctioned up.
Tip:
Thorough vacuuming before deep cleaning will prevent early clogging of the lint trap.
Handle Release Power Switch
Heater Switch
11
w w w . b i s s e l l . c o m