Bissell 87K1 warranty Maintenance and care, Cleaning with your Little Green Pet, After cleaning

Models: 87K1

1 8
Download 8 pages 9.35 Kb
Page 6
Image 6
Cleaning with your Little Green Pet

Operations

Cleaning with your Little Green Pet

1.

Hold the tool approximately 2.5 cm above

IMPORTANT:

 

the soiled surface. Press the spray trigger to

 

apply the cleaning solution to the soiled area.

Check the manufacturer’s tag before

2.

Using the brush on the tool, gently scrub

cleaning upholstery. “W” or “WS” on

 

the area to be cleaned.

the tag means you can use your Little

 

Green Pet. If tag is coded with an “S”

3.

For thorough cleaning, spray additional

(with diagonal strike-through), or says

 

solution while the brush and suction are

“Dry Clean Only,” do not proceed. If

 

in contact with the surface.

manufacturer’s tag is missing or not

 

coded, check with your furniture dealer.

 

 

4.Apply downward pressure on the tool and

 

pull it toward you. The suction will remove

Tip:

 

Tip:

 

the dirt and cleaning solution. Continue

 

 

until no more dirt can be removed.

 

5.

As a final step, use “drying strokes” (by

If a significant

 

Check upholstery

 

not pressing the spray trigger) to remove

amount of BISSELL

 

stuffing before

 

compact formula/

 

cleaning. Colored

 

as much liquid/moisture as possible.

water remains, it

 

stuffing may bleed

 

Repeat this step as often as necessary.

is all right to leave

 

through the fabric

Maintenance and care

it in the clean

 

when it becomes

tank for your next

 

wet.

 

 

water/solution

 

After cleaning

cleaning task.

 

 

 

 

 

 

 

 

1. Unplug power cord from outlet.

 

 

 

 

 

 

Tip:

 

 

 

2. Empty and rinse the dirty water/collec-

 

 

 

 

 

tion tank after each use, OR when dirty

 

Before turning off the Little Green Pet,

 

 

water reaches the indicated maximum fill

 

 

 

line. To remove the tank, lift up the dirty

 

suction up clean water to thoroughly

 

 

water/collection tank release latch and

 

rinse out the interior of the flex hose.

 

 

 

Then, lift the cleaning tool and point

 

 

remove the tank from the unit.

 

 

 

 

it upwards to drain any remaining

 

3.

Disconnect the cleaning tool from the

 

water into the dirty water/

 

 

hose grip by pushing down on button

 

collection tank.

 

 

 

 

lock and pulling straight off.

 

 

Tank Release Latch

 

(Do NOT twist tool to remove it)

 

 

4.Once removed from the hose grip, clean tool by rinsing under running water.

5.Check spray nozzle for accumulated dirt or debris. If necessary, clean with soft bristle brush.

Machine storage

1.Wipe all surfaces with a soft cloth.

2.Wrap power cord around the cord wrap on the back of the Little Green Pet.

3.Wrap vacuum flex hose around the base of the unit and place hose grip into storage bracket. Turn bracket latch coun- terclockwise to lock into place.

4.Store unit in protected, dry area, at room temperature (4.4º to 43.3ºC).

Maintenance and care WARNING:

Keep spray away from face. Failure to do so may result in personal injury.

6w w w . b i s s e l l . c o m

Page 6
Image 6
Bissell 87K1 Maintenance and care, Cleaning with your Little Green Pet, After cleaning, Machine storage, Operations