Carpet Cleaning
1. | Plug into a proper outlet and turn the Power and the |
SmartTemp switches ON. Wait two minutes for the | |
| heater to warm up before beginning to clean. |
2. | While pressing the trigger, make one slow forward wet |
pass and another one back. Let the SmartTemp heated | |
| formula and DirtLifter Powerbrush do the work for you. |
| Caution: Do not overwet. |
| Note: Take care not to run over loose objects or |
| edges of area rugs. Stalling brush may |
| result in premature belt failure. |
3. | Release the trigger and make one slow forward and back |
pass over the same area to remove any residual dirty water. | |
4. | Repeat cleaning passes until solution being pulled up |
appears clean. | |
5. | Continue passes without pressing the trigger until you |
can’t see any more water being pulled up. | |
| Note: Both the SmartMix and the clean water |
| tank must have liquid in them in order for |
| the machine to spray. If one tank is empty |
| the machine will not apply either cleaning |
| solution or water only. |
6. | After cleaning, you may want to turn the SmartMix dial to |
the Water Rinse/Carpet Protector setting to give your | |
| carpeting a final rinse. This will ensure thorough removal |
| of embedded dirt loosened by the Advanced Deep |
| Cleaning Formula. BISSELL Advanced Cleansing |
| Formulas contains an |
| carpets repel dirt and keeps them looking good longer. |
7. | When the cleaning job is complete refer to the |
Maintenance section for machine cleanup and storage |
instructions on page 17-19.
ATTENTION BERBER CARPET OWNERS:
Some Berber Carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. Please see Stain Removal instructions on page 12.
11