Bissell 90T1 Operations, Special features, Getting ready, Removable water tank, Water filter

Models: 90T1

1 12
Download 12 pages 33.34 Kb
Page 6
Image 6
Special features

Special features

Removable water tank

The water tank is located on the back of the Steam Mop. It can be refilled with water any time during use. Distilled or demineralized water may be used in place of tap water.

Do not use chemicals with your Steam Mop.

Water filter

This filter removes minerals and other impurities from tap water, preventing water deposits from damaging your Steam Mop. It should be replaced when the bright green grains turn blue. To maximize performance of the filter, dis- tilled water may be used.

Ready light

The ready light will glow when the

Steam Mop is ready to use.

Steam on demand trigger

Press to release steam.

Maneuverable swivel head When cleaning in the manual mode, press the spray trigger to release water and formula onto the area to be cleaned.

Microfiber mop pads Reuseable microfiber mop pad is machine washable and safe for all hard floor surfaces.

Operations

Getting ready

The mop pad may have already come attached to the swivel head, if not follow steps 1A and 1B below.

1.Attach mop pad

A.Set swivel head in mop pad, making sure the drawstring is located on the back

B.Tighten mop pad by pulling on the drawstring while pressing on

the toggle.

Tip:

Do not attempt to use your Steam Mop Max without water in the tank.

1A1B

6w w w . b i s s e l l . c o m

Page 6
Image 6
Bissell 90T1 warranty Operations, Special features, Getting ready, Removable water tank, Water filter, Ready light