Bissell 9200, 9400 warranty Before You Clean, Carpet Cleaning

Before You Clean

1.Plan activities to give your carpet time to dry.

2.Move furniture to another area if cleaning an entire room (optional).

3.Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning.

4.Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit.

Carpet Cleaning

1.Fill the 2-in-1 water tank. Remove the tank from the base of the machine by lifting up the tank carry handle. Carry like a bucket to the sink.

1a. Unlatch the top of the tank from the bottom by lifting up on the tank latch which is located on the back of the tank.

1b. Remove the top of the tank by lifting up on the handle.

Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together.

1c. Fill the heavy duty bladder with clean hand hot tap water.

*Do not boil or microwave water as it can destroy the bladder.

1d. Leaving the filled bottom of the tank on a flat surface, only maneuver the top of the tank. To attach the top part of the tank to the bottom, carefully hook the lip on the top tank into the groove on the bottom tank.

1e. Fasten tanks together by securing the latch in the back.

Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank.

w w w . b i s s e l l . c o m

ug310-5880_9200E_406.indd 9

	9
XIT	10
11	8
12	3’
	7
	1
	6
5	2
	3
	4

ATTENTION:

Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. Please see Stain Removal instructions on page 15.

11a

1b 1c

1d

Lip

Groove

(underside of bottom tank)

1e

9

6/9/06 4:25:39 PM