Bissell 9600 Stain removal (continued), Hard floor cleaning

16 www.bissell.com 800.237.7691

Operation

Stain removal (continued)

7. Clean using either the FLOOR CLEANING, or

TOOLS setting on the ReadyTools dial.

Hard floor cleaning

Your ProHeat 2X model may have come with a

hard floor attachment and Hard Floor Solutions

Formula. If not, these products are available for

purchase by contacting the BISSELL Consumer

Services department by phone or at the website.

The hard floor tool provides effective cleaning for

linoleum, vinyl, and tile floors.

Caution: Do not use on unsealed hardwood floors.

1. Vacuum or sweep thoroughly to pick up any

loose debris and pet hair.

2. Move any furniture, if needed.

3. Empty any carpet cleaning formula back into

the BISSELL bottle if stored in the formula

tank. Fill formula tank with BISSELL Hard

Floor Solutions, available at many retailers,

or contact BISSELL Consumer Services.

4. Fill the 2-in-1 water tank with hot tap water

and set aside.

5. Attach the hard floor tool onto the bottom of

the machine by hooking it into the nozzle and

swinging it down until it clicks into place.

6. Check ReadyTools dial. It should be set on

floor cleaning.

7. Set the Custom Clean dial to normal clean.

8. Plug into an outlet and turn the power

switch and heater ON ( I ).

9. Slowly move the machine forward and back over

hard floor surface one time while depressing

trigger. Caution: Do not overwet.

10. Repeat the motion without pressing the

trigger using the hard floor tool to squeegee

and suction up the dirty water.

WARNING:

To reduce the risk of fire,

electric shock or injury

unplug from outlet before

servicing.

5.

ug120-4084_9500_908.indd 16 11/18/08 9:03:21 AM

Contents

Main USERS GUIDE ProHeat 2X CleanShot T 2 3 I WARNING: To reduce the risk of fire, electric shock, or injury: SAVE THESE INSTRUCTIONS. P 5 P BISSELL Formulas: H A 6 Tough Stain Brush TurboBrush Spraying Crevice Tool Crevice Tool Holder Built-in-Heater feature Dual DirtLifter PowerBrushes Custom Clean 8 CleanShot CleanShot Dry Aire Flow Gauge Easy to remove and clean nozzle ReadyTools dial Scotchgard Protector Before you clean 10 ATTENTION: Before you clean (continued) Carpet cleaning Lip Groove Carpet cleaning (continued) Power Switch Heater Switch Power Switch Power Switch Carpet cleaning (Continued) Cleaning with attachments Cleaning with attachments (continued) Cleaning fluid section Stain removal 6b. Stain removal (continued) Hard floor cleaning To reduce the risk of fire, electric shock or injury unplug from outlet before servicing. Hard floor cleaning (continued) Machine storage WARNING: To reduce the risk of fire, electric shock or injury unplug from outlet before servicing. Filter Tip: Let all parts dry completely before storing Machine care (continued) 8. Small belt removal and replacement To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing. Brush removal and large belt replacement To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing. Built-in heater ready light does not illuminate Reduce Spray or No Spray 20 Reduce Spray or No Spray (continued) DirtLifter PowerBrushes do not turn 3. Circuit breaker may have tripped. 3. Turn the machine OFF ( O ) and Cleaner not picking up solution Please do not return this product to the store. B Or visit the BISSELL website - www.bissell.com Please register your new BISSELL product at www.bissell.com/productregistration Item Part No. Part Name R 22 R Earn Rewards Points! 24 W Limited One Year Warranty If your BISSELL product should require service: