SRP-270
4. Self-Test
Run the
- Control Circuits, Mechanisms, Print Quality, and ROM Version
If no issue is found with the printer after running the
1)Check to see that the paper is properly installed.
2)Turn off the printer power and close the printer paper cover.
3)Press the paper feed button and simultaneously turn on the printer power to commence the
4)The test ceases after printing the current printer status and the following message. (The 'PAPER LED' lamp blinks.)
SELF-TEST PRINTING.
PLEASE PRESS THE FEED BUTTON.
5)To additionally print the embedded characters in the printer, press the paper feed button once more.
6)The
**CHARACTER TEST COMPLETED **
Rev. 1.05 | - 19 - |