Black & Decker 11-4-12S, 11-4-12e manual Troubleshooting, Care and Cleaning, English

Models: 11-4-12S 11-4-12e

1 11
Download 11 pages 62.94 Kb
Page 9
Image 9
TROUBLESHOOTING

SCALE FILTER

D

Always boil water with the scale filter in place just behind the spout (D). Lime scale forms over time when water is heated. Though scale is natural and harmless, it may produce a powdery substance or mineral-like chunks that can get into your hot beverages and affect the taste. While the concealed heating element in this kettle is designed to help reduce scale buildup, the filter helps prevent particles from pouring into your beverage.

TROUBLESHOOTING

 

 

 

 

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

Kettle is not heating.

Kettle is not plugged in.

Check to be sure appliance is

 

Kettle is not properly

plugged into a working outlet,

 

placed on power base.

the I/O (On/Off) button has

 

 

been engaged and the kettle

 

 

is securely placed on the

Care and Cleaning

This appliance contains no user-serviceable parts. Refer service to qualified service personnel.

1.Before cleaning, be sure the base is unplugged and the kettle has cooled completely. Empty any remaining water from the kettle.

2.Pull out the scale filter for cleaning. Wash the filter in warm soapy water and rinse or place it in the utensil holder of the dishwasher.

3.Wash the inside of the kettle with soapy water and rinse. NEVER IMMERSE THE KETTLE IN WATER OR OTHER LIQUIDS or place in a dishwasher.

4.Wipe the exterior of the kettle and base with a damp cloth or sponge and dry. The concealed heating element at the bottom of the interior may discolor. This will not affect performance. Do not use abrasive soaps, cleansers, or scouring pads.

5.Over time, the kettle may heat up but will not boil, depending on your use and the hardness of the water in your area. When this happens, it is time for descaling. Use a scale/lime remover and follow its manufacturer's directions.

 

 

power base.

ENGLISH

 

 

 

Kettle has boiled dry.

Kettle was accidentally

Unplug kettle and allow

 

turned on without water.

to fully cool down before

 

 

refilling.

 

 

 

 

 

 

 

Kettle heats, but does

Appliance may need

Follow directions for

 

not boil or works

descaling.

descaling the kettle.

 

intermittently.

 

 

 

 

 

 

 

The On (I) button

The kettle is too hot.

Allow the kettle to cool down

 

will not stay on.

 

at least 5 to 10 minutes.

 

 

 

Make sure there is enough

 

 

 

water in the kettle.

 

16

17

Page 9
Image 9
Black & Decker 11-4-12S, 11-4-12e manual Troubleshooting, Care and Cleaning, English