385932-02/NStar220 Drills.rev 7/2/02 3:49 PM Page 2
English
CAUTION: Wear appropriate hearing protection during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
•The label on your tool may include the following symbols.
|
| V | volts | ||
|
| A | amperes | ||
Hz | hertz | ||||
W | watts | ||||
min | minutes | ||||
|
|
| ................................ | alternating current | |
|
|
|
|
| direct current |
................................no | |||||
|
|
| ................................ | Class II Construction | |
…/min | revolutions or reciprocation per minute | ||||
|
|
|
|
| earthing terminals |
|
|
|
|
| |
|
|
| ................................ | ||
|
|
|
|
| |
|
|
| ................................ | safety alert symbol |
FIG. 1 | FIG. 2 |
A | REVERSING |
LEVER | |
| (Shown in Forward |
| Position) |
FIG. 3
SWITCH
ASSEMBLY
220 VOLT PLUG
2