Care and Cleaning

STEAM IRONING
1.	Be sure there is water in the water tank.
2.	Turn the temperature selector between settings 5 and 7.
3.	Unlock the steam button to the Up position (E). If steam
	does not start, gently bump the soleplate on the ironing
	board a few times. If water drips from vents, turn the
E	selector to a higher setting.

DRY IRONING

1.Turn the temperature selector to the desired setting and lock the steam button in the DOWN position. For extended periods of dry ironing, empty the water from the iron.

2.If you want to empty the water, hold the iron over a sink with the tip pointing down. Water will empty out the fill hole. Stay clear of splashing hot water.

ANTI DRIP SYSTEM

The anti drip system prevents water spotting at low temperatures.

EMPTYING WATER TANK (OPTIONAL)

1.Unplug the iron and let it cool.

2.To release the water, hold the iron over a sink with the tip pointing down and to one side. Water will empty out of the water-fill opening.

This product contains no user serviceable parts. Refer service to qualified service personnel.

CLEANING

1.Move the temperature selector to OFF, unplug the iron and allow the iron to cool completely.

2.Wipe the soleplate and outer surfaces with a soft cloth or sponge dampened in water. Never use abrasives, heavy duty cleansers, or scouring pads that may scratch or discolor the iron.

STORAGE

1.Turn the temperature selector to OFF, unplug the iron and allow to cool completely.

2.Lock the steam button in the DOWN position. This helps keep the water valve clean and prevents water from entering the steam chamber, which could cause spitting during next use.

3.Store iron on its heel rest. Storing the iron on its soleplate can cause leaks or damage.

4.Wrap the cord.

NEED HELP?

For service, repair or any questions regarding your appliance, call the appropriate 800 number on cover of this book. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail product back to manufacturer, nor bring it to a service center. You may also want to consult the website listed on the cover of this manual.

Two-Year Limited Warranty

(Applies only in the United States and Canada) What does it cover?

•Any defect in material or workmanship provided; however, Applica’s liability will not exceed the purchase price of product.

For how long?

•Two years after date of purchase. What will we do to help you?

•Provide you with a reasonably similar replacement product that is either new or factory refurbished.

How do you get service?

•Save your receipt as proof of date of sale.

•Visit the online service website at www.prodprotect.com/applica, or call toll-free 1-800-231-9786, for general warranty service.

•If you need parts or accessories, please call 1-800-738-0245.

What does your warranty not cover?

•Damage from commercial use

•Damage from misuse, abuse or neglect

•Products that have been modified in any way

•Products used or serviced outside the country of purchase

•Glass parts and other accessory items that are packed with the unit

•Shipping and handling costs associated with the replacement of the unit

•Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)

How does state law relate to this warranty?

•This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.

is a registered trademark of The Black & Decker Corporation, Towson, Maryland, USA