EMPTYING THE IRON

Figure G

CLEANING

THE OUTSIDE

SURFACES

1.Turn the TEMPERATURE SELECTOR DIAL to Off.

2.Set the ADJUSTABLE STEAM/DRY DIAL to the INDICATOR MARK for Dry.

3.Unplug the iron and allow it to cool.

4.Empty the water by holding the iron over a sink with the tip pointing down- ward (Figure G). Take care to avoid any hot water splatter. Water will empty out the WATER FILL HOLE.

5.If all the water hasn’t drained, repeat the emptying process.

1.Allow the iron to cool completely.

2.Wipe the outer shell and SilverStone® non-stick soleplate with a cloth dampened in water and a mild household detergent. Never use abra- sives, heavy-duty cleansers, or scour- ing pads.

Need Help?

IRON

WON’T HEAT?

IRON WON’T START STEAMING

1.Is the iron plugged in and the green Power Light on? Press the PUSH ON Button.

2.If the Light is not on, will a lamp plugged into the out- let turn on?

3.Is the TEMPERATURE SELECTOR DIAL turned to a fabric setting?

1.Check to see if there is enough water in the Water Tank.

2.Is the ADJUSTABLE STEAM/DRY DIAL set at , ,

or ? Adjust the Dial to Dry and back to the desired steam level several times.

10

Page 10
Image 10
Black & Decker 62784 manual Need Help?, Emptying the Iron, Cleaning Outside Surfaces, Iron WON’T HEAT?