d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4)Power tool use and care

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)Service

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Specific Safety Rules

•

Hold power tool by insulated gripping surfaces, when performing an operation

 

where the cutting accessory may contact hidden wiring. Cutting accessory

 

contacting a “live” wire may make exposed metal parts of the power tool “live” and

•

could give the operator an electric shock.

Always hold tool firmly with both hands and only operate when hand held.

•

Use clamps or another practical way to secure and support the work piece to a

 

stable platform. Holding the work by hand or against your body leaves it unstable and

 

may lead to loss of control.

WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask if operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

•ANSI Z87.1 eye protection (CAN/CSA Z94.3),

•ANSI S12.6 (S3.19) hearing protection,

•NIOSH/OSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber (CCA).

3

Page 2 Page 4
Page 3
Image 3
Black & Decker 7558 instruction manual Specific Safety Rules
Page 2 Page 4

7558 specifications

The Black & Decker 7558 is an impressive electric lawn mower designed for homeowners seeking a reliable and efficient tool for maintaining their lawns. This mower stands out for its combination of power, ease of use, and advanced features, making it an essential addition to any garden care arsenal.

One of the most notable features of the Black & Decker 7558 is its robust 12-amp motor, which provides ample power to tackle even the toughest grass and tackle uneven terrains. This strength is complemented by its 20-inch cutting deck, allowing for a wide cutting path that minimizes the time spent mowing lawns of various sizes. The mower also boasts a variable height adjustment capability, offering six different cutting heights ranging from 1 inch to 3 inches. This versatility enables users to customize the grass length according to their preferences and the needs of their lawn.

The mower is equipped with a lightweight design, making it highly maneuverable for users of all strengths. Its durable wheels allow for smooth movement across diverse terrains, ensuring that every corner of the yard can be easily accessed. Additionally, the compact design means it can be stored conveniently in small spaces, a bonus for those with limited storage options.

Another critical aspect of the Black & Decker 7558 is its emphasis on user convenience. The mower features an ergonomic handle that provides a comfortable grip, reducing fatigue during prolonged use. It also includes a cord retention system that prevents accidental disconnection from the power source, ensuring uninterrupted mowing.

In terms of technology, the mower integrates advanced safety features such as a safety key, which prevents accidental starts when the mower is not in use. The poly deck construction resists rust and corrosion, enhancing durability for long-term use.

Overall, the Black & Decker 7558 combines power, efficiency, and user-friendly features into a single electric lawn mower. Its cutting-edge technology and design cater to the needs of modern homeowners, making lawn care a more manageable task. Whether you have a small yard or a larger plot, the Black & Decker 7558 offers the reliability and performance needed to achieve a beautifully manicured lawn.
Top Page Image Contents