Single Speed Jigsaw
INSTRUCTION MANUAL
Catalog Number
7662
THANK YOU FOR CHOOSING BLACK & DECKER! GO TO WWW.BLACKANDDECKER.COM/NEWOWNER
TO REGISTER YOUR NEW PRODUCT.
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., AND DATE CODE . IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE ASUGGESTION OR COMMENT, GIVE US ACALL. YOUR FEEDBACK IS VITALTO BLACK & DECKER.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CAT. NO. 7662 FORM NO. 90510243 Copyright © 2007 Black & Decker MAR. ‘07 Printed in China
General Safety Rules
WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your
SAVE THESE INSTRUCTIONS
1) Work area safety |
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. |
b) Do not operate power tools in explosive atmospheres, such as in the presence of |
flammable liquids, gases or dust. Power tools create sparks which may ignite the |
dust or fumes. |
c) Keep children and bystanders away while operating a power tool. Distractions can |
cause you to lose control |
2) Electrical safety |
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not |
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and |
matching outlets will reduce risk of electric shock |
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, |
ranges and refrigerators. There is an increased risk of electric shock if your body is |
earthed or grounded. |
c) Do not expose power tools to rain or wet conditions. Water entering a power tool |
will increase the risk of electric shock. |
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the |
power tool. Keep cord away from heat, oil, sharp edges or moving parts. |
Damaged or entangled cords increase the risk of electric shock. |
e) When operating a power tool outdoors, use an extension cord suitable for |
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. |
3) Personal safety |
a) Stay alert, watch what you are doing and use common sense when operating a |
power tool. Do not use a power tool while you are tired or under the influence of |
drugs, alcohol or medication. A moment of inattention while operating power tool may |
power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g)Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5)Service
a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Specific Safety Rules
•Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
•Keep hands away from cutting area. Never reach underneath the material for any rea- son. Hold front of saw by grasping the contoured gripping area. Do not insert fingers or thumb into the vicinity of the reciprocating blade and blade clamp. Do not stabilize the saw by gripping the shoe.
•Keep blades sharp. Dull blades may cause the saw to swerve or stall under pressure.
•When cutting pipe or conduit ensure that they are free from water, electrical wiring, etc.
•Allow the motor to come to a complete stop before withdrawing the blade from the kerf (the slot created by cutting). A moving blade may impact the workpiece causing a broken blade, workpiece damage or loss of control and possible personal injury.
•Never hold work in your hand, lap or against parts of your body when sawing. The saw my slip and the blade could contact the body causing injury.
•Keep handles dry, clean, free from oil and grease. This will enable better control of the tool.
•Use extra caution when cutting overhead and pay particular attention to overhead wires which may be hidden from view. Anticipate the path of falling branches and debris ahead of time.
•Clean out your tool often, especially after heavy use. Dust and grit containing metal particles often accumulate on interior surfaces and could create an electric shock hazard.
•Do not operate this tool for long periods of time. Vibration caused by the operating action of this tool may cause permanent injury to fingers, hands, and arms. Use gloves to
provide extra cushion, take frequent rest periods, and limit daily time of use.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.
CAUTION: Wear appropriate hearing protection during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.
The label on your tool may include the following symbols. |
| |||||
V | volts | A | amperes | |||
Hz | hertz | W | watts | |||
min | minutes | no | alternating current | |||
|
| direct current | no load speed | |||
|
| |||||
| .......................... | Class II Construction |
|
| ........................ | earthing terminal |
|
|
|
|
| ||
|
|
|
|
| ||
| ........................ | safety alert symbol | .../min | revolutions or | ||
|
|
|
|
|
| reciprocations |
|
|
|
|
|
| per minute |
result in serious personal injury. |
b) Use safety equipment. Always wear eye protection. Safety equipment such as |
dust mask, |
conditions will reduce personal injuries. |
c) Avoid accidental starting. Ensure the switch is in the |
in. Carrying power tools with your finger on the switch or plugging in power tools that |
have the switch on invites accidents. |
d) Remove any adjusting key or wrench before turning the power tool on. A wrench |
or a key left attached to a rotating part of the power tool may result in personal injury. |
e) Do not overreach. Keep proper footing and balance at all times. This enables better |
control of the power tool in unexpected situations. |
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing |
and gloves away from moving parts. Loose clothes, jewelry or long hair can be |
caught in moving parts. Air vents often cover moving parts and should also be avoided. |
g) If devices are provided for the connection of dust extraction and collection |
facilities, ensure these are connected and properly used. Use of these devices can |
reduce |
4) Power tool use and care |
a) Do not force the power tool. Use the correct power tool for your application. The |
correct power tool will do the job better and safer at the rate for which it was designed. |
b) Do not use the power tool if the switch does not turn it on and off. Any power tool |
that cannot be controlled with the switch is dangerous and must be repaired. |
c) Disconnect the plug from the power source and/or the battery pack from the |
power tool before making any adjustments, changing accessories, or storing |
Features - Figure A
1.Single speed switch
2.
3.Saw blade clamp
4.Saw blade clamp screws
5.Saw blade support roller
6.Dust blower
7.Shoe plate
8.Saw blade storage compartment
A2
1
8
4 3
6
57
