Black & Decker 90510657 instruction manual Safety Rules and Instructions Extension Cords

BLOWER

•INSPECT THE AREA before using the tool. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

WARNING: To reduce the risk of electrical shock; do not expose to rain, do not use on wet surfaces. Store indoors.

WARNING: Turn off and unplug unit, then wait until fan stops or at least 10 seconds before removing the blower tube assemblies.

SAVE THESE INSTRUCTIONS

INSTRUCTION MANUAL

Date Code:

Catalog Number BL1200

THANK YOU FOR CHOOSING BLACK & DECKER!

GO TO WWW.BLACKANDDECKER.COM/NEWOWNER

TO REGISTER YOUR NEW PRODUCT.

BEFORE RETURNING THIS PRODUCT

FOR ANY REASON PLEASE CALL

1-800-544-6986

BEFORE YOU CALL, HAVE THE CATALOG No. AND DATE CODE AVAILABLE. IN MOST CASES, A

BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A

SUGGESTION OR COMMENT, GIVE US ACALL. YOUR FEEDBACK IS VITALTO BLACK & DECKER.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Form No. 90510657 Rev. 1	Cat. # BL1200	(APR. ‘07)
Copyright © 2007 Black & Decker		Printed in Mexico

WARNING: IMPORTANT SAFETY WARNINGS AND INSTRUCTIONS

TO REDUCE RISK OF INJURY:

•Before any use, be sure everyone using this tool reads and understands all safety instructions and other information contained in this manual.

•Save these instructions and review frequently prior to use and in instructing others.

WARNING: When using an electric appliance, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury, including the following.

Release Button	OFF	ON
Bouton de Dégagement
Botones de Liberación	Arrêt	En Marche
	Apagada	Encendido
	O
		Switch
		Interrupteur
1		Interruptor
3
4
A
6
B
	C

2

5

Blowing Mode

Souffleuse

Modo de

Soplador

7

8

WARNING: Some dust created by this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•compounds in fertilizers

•compounds in insecticides, herbicides and pesticides

•arsenic and chromium from chemically treated lumber

To reduce your exposure to these chemicals, wear approved safety equipment such as dust masks that are specially designed to filter out microscopic particles.

WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.

CAUTION: Wear appropriate personal hearing protection during use. Under some con- ditions and duration of use, noise from this product may contribute to hearing loss.

READ ALL INSTRUCTIONS BEFORE USING BLOWER.

GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL TOOLS

•READ and follow all instructions.

•DO NOT place inlet or outlet of blower near eyes or ears when operating.

•THIS APPLIANCE IS PROVIDED WITH DOUBLE INSULATION. Use only identical replacement parts. See instructions for servicing of double insulated appliances.

•STORE IDLE TOOLS. When not in use, the unit should be stored in a dry, high or locked-up place - out of reach of children.

•DON'T OVERREACH. Keep proper footing and balance at all times.

•MAINTAIN TOOL WITH CARE. Keep fan area clean for best and safest performance. Follow instructions for proper maintenance.

•DO NOT attempt to repair the blower. To assure product safety and reliability, repairs, maintenance, and adjustments should be performed by Black & Decker service centers or authorized service stations, always using Black & Decker replacement parts.

•DO NOT operate blower in a gaseous or explosive atmosphere. Motors in these tools normally spark, and the sparks might ignite fumes.

•USE EXTRA CARE when cleaning on stairs.

•DO NOT leave appliance when plugged in. Unplug from outlet when not in use and before servicing.

•DO NOT allow to be used as a toy. Close attention is necessary when used by or near children. Not recommended for use by children.

•USE ONLY as described in this manual. Use only manufacturer's recommended attachments.

•DO NOT use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.

•DO NOT pull or carry by cord, use cord as a handle, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.

•DO NOT unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•DO NOT put any objects into openings. Do not use with any opening blocked; keep free of dust, lint, hair and everything that may reduce air flow.

•KEEP hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

•TURN OFF all controls before unplugging.

•DO NOT handle plug or appliance with wet hands.

•KEEP CHILDREN, BYSTANDERS AND ANIMALS AWAY from the work area a minimum of 30 feet (10 meters) when starting or operating the tool.

SERVICING OF DOUBLE INSULATED APPLIANCES

Your Blower is double-insulated to give you added safety. In a double insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double insulated appliance requires extreme care and knowledge of the system and should be done only by qualified service personnel. Replacement parts for a double insulated appliance must be identical to the parts they replace. A double insulated appliance is marked with the words double insulated or "double insulation". The symbol (square within a square) may also be marked on the appliance.

SAFETY RULES AND INSTRUCTIONS: EXTENSION CORDS

Double insulated tools have 2-wire cords and can be used with 2-wire or 3-wire extension cords. Only round jacketed extension cords should be used, and we recommend that they be listed by Underwriters Laboratories (U.L.) (C.S.A. in Canada). If the extension will be used outside, the cord must be suitable for outdoor use. Any cord marked as outdoor can also be used for indoor work.

An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety, and to prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size.

To determine the minimum wire size required, refer to the chart below. Before using an extension cord, inspect it for loose or exposed wires, damaged insulation, and defective fittings. Make any needed repairs or replace the cord if necessary.

			Minimum Gage for Cord Sets
Volts				Total Length of Cord in Feet
120V			0-25	26-50	51-100	101-150
240V			0-50	51-100	101-200	201-300
Ampere Rating
More		Not more		American Wire Gage
Than		Than
0	-	6	18	16	16	14
6	-	10	18	16	14	12
10-		12	16	16	14	12
12-		16	14	12	Not Recommended

SAFETY WARNINGS AND INSTRUCTIONS: POLARIZED PLUG

To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This equipment must be used with a suitable polarized 2 wire or 3 wire extension cord. Polarized connections will fit together only one way. Make sure that the receptacle end of the extension cord has large and small blade slot widths. If the plug does not fit fully into the extension cord, reverse the plug. If it still does not fit, obtain a suitable extension cord. If the extension cord does not fit fully into the outlet, contact a qualified electrician to install the proper outlet. Do not change the tool plug or extension cord in any way.BEFORE OPERAT

BEFORE OPERATINGG

•SECURING POWER SUPPLY CORD - Secure the extension cord in the tool's built-in cord retainer as shown in Figure 7 or secure the power supply cord and a suitable exten- sion cord as shown in Figure 8.

SWITCH

NOTE: The switch will not operate if the release button, shown in Figure 1, is depressed. To turn the tool ON, slide the switch forward, as shown in Figure 1. To turn tool OFF, slide switch to the rear.