Black & Decker AS800 manual Emptying Water Tank Optional, Cleaning Outside Surfaces, Auto Cleaning

L

2.To dry iron at higher settings, empty the water from the reservoir to prevent steaming.

Emptying Water Tank (Optional)

Note: It is not necessary to empty the water after each use.

1.Unplug the iron and let it cool.

2.To release the water, hold the iron over a sink with the tip pointing down. Water will empty out of the water-fill hole (L).

NOTES

Care and Cleaning

This product contains no user-serviceable parts. Refer service to qualified service personnel.

Cleaning Outside Surfaces

1.Make sure iron is unplugged and has cooled completely. Wipe the soleplate and outer surfaces with a soft cloth dampened with water. Add mild household detergent. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch

or discolor the iron.

2.After cleaning, steam iron over an old cloth to remove any residue from the steam vents.

Auto Cleaning

To keep the steam vents free of any buildup, about once a month follow these instructions.

1.Fill the water tank well below the MAX line. Plug in the iron.

2.Turn the fabric-select dial to 7 and stand the iron on its heel rest.

3.Wait for the iron to beep and READY to display on the digital window.

4.Unplug the iron and hold over a sink with the soleplate facing down.

M

5.Press and hold the AUTO CLEAN® button. Be careful, as hot water and steam will come out of the steam vents (M). Continue to hold the auto-clean button until all the water has emptied. If necessary, rock iron side to side and front to back.

6.When finished, release the button, stand the iron on its heel rest and plug it in. Heat for about 2 minutes to dry out any remaining water.

N

Storing your Iron

1.Unplug the iron and allow it to cool.

2.Store vertically on its heel to prevent water leaking from the soleplate. You can wrap the cord around the smart stand for storage (N).

13 14