How to use your Grinding Mill
•Make sure that the switch is in the off position.
•Place the ingredients in the grinder Jar (figure D)
•Tighten the grinder blade assembly (ensure that the sealing ring is in place) onto the grinder jar by rotating it anticlockwise. (figure E)
•Assemble the grinder Jar assembly onto the main unit by locking it in position by rotating it anticlockwise. (figure F)
•Use the pulse operation 2~3 times initially to mix the ingredients.
•Now select the speed till the desired consistency is achieved.
Fig. D
Fig. E
Fig. F
•When the grinding is finished turn the speed knob to "0" position and wait till the blade comes to complete stop.
•Remove the grinder assembly from the main unit by rotating it clockwise.
•Hold the grinder assembly as shown in figure D, rotate the blade assembly clockwise & lift it from the jar. You can then pour the contents out.
NOTE:
-Never use the grinder assembly for more than 30seconds without interruption. Allow the grinder to cool down for at least one minute between two consecutive operating cycles.
- Never forget to place the sealing ring in the grinder blade assembly |
|
(figure G). If it is not present or damaged, it will cause leakage |
|
of ingredients during usage. | Fig. G |
-Your dry grinding mill is meant for grinding small quantities of dry ingredients.
-Never use the grinder to grind very hard ingredients such as nutmeg, turmeric etc.
-The Grinding mill cover will get discoloured when the grinder is used to process ingredients such as cloves, anise etc.
Control Panel
1. | Position "0" - the unit does not operate, and it is in OFF position. |
| O | |
2. | Position "P"- the unit will operate at high speed as long as | P | ||
| ||||
| the knob is held in this position. (figure H) |
|
| |
3. | Position "1" - the blender works at low speed. |
|
| |
4. | Position "2" - the blender works at high speed. | Fig. H |
| |
|
|
|
1
2
To Crush Ice
•Liquid must be used to crush ice.
•To make frozen drinks, fill the jar with liquid upto desired level ( max half the jar capacity) and then put in ice cubes ( the max size of diced ice cubes should be not more than 2cms).
•Blend / crush the content till desired consistency is achieved, then turn the knob to the "0"position.
NOTE : Do not crush ice without liquid.
