ANTI-DRIP SYSTEM 
NOTES
The
Dry Ironing
K
L
1.Turn the 
(K). The Smart Steam™ system will automatically turn off and there will not be any steam generated.
2.To dry iron at higher settings, empty the water from the reservoir to prevent steaming.
Emptying Water Tank (Optional)
Note: It is not necessary to empty the water after each use.
1.Unplug the iron and let it cool.
2.To release the water, hold the iron over a sink with the tip pointing down. Water will empty out of the
Care and Cleaning
This product contains no
Cleaning Outside Surfaces
1.Make sure iron is unplugged and has cooled completely. Wipe the soleplate and outer surfaces with a soft cloth dampened with water. Add mild household detergent. Never use abrasives,
or discolor the iron.
2.After cleaning, steam iron over an old cloth to remove any residue from the steam vents.
Auto Cleaning
To keep the steam vents free of any buildup, about once a month follow these instructions.
1.Fill the water tank well below the MAX line. Plug in the iron.
2.Turn the
3.Wait for the iron to beep and READY to display on the digital window.
4.Unplug the iron and hold over a sink with the soleplate facing down.
5. Press and hold the AUTO CLEAN® button. Be careful, as hot water and steam will come out of the steam vents (M). Continue to hold the
| 6. When finished, release the button, stand the iron on its heel rest |
M | and plug it in. Heat for about 2 minutes to dry out any remaining |
water. |
Storing your Iron
1. Unplug the iron and allow it to cool.
2.Store vertically on its heel to prevent water leaking from the soleplate. You can wrap the cord around the smart stand for
storage (N).
N
13 | 14 |
