Black & Decker D5501 Ironing with Steam, Using Spray, Ironing Without Steam, Special Features

4.Once the iron reaches the selected temperature, it beeps and shows the selected temperature number with corresponding fabric type and the iron symbol.

IRONING WITH STEAM

Smart Steam™ Technology

The Smart Steam™ system automatically generates steam at temperature settings between 5 and 7 (F).

F

Press the Steam On/Off button to turn on the steam function.

The Steam symbol on the digital display flashes, indicating that

steam function is ready (G).

Surge of Steam

Use to remove stubborn creases.

1. With the water tank filled to the MAX mark, press appropriate

fabric temperature selector pushbutton to select the setting

(between 5 and 7) for your fabric. Read garment's label to help

you determine fabric type.

USING SPRAY
	Use to dampen tough wrinkles at any setting (K).
	1.	Be sure the iron is filled with water.
	2.	On first use, pump the spray button	several times.
MAX	AUTO CLEAN
	IRONING WITHOUT STEAM
	Note: You can use the Steam On/Off button to turn off the steam
K		function in all settings (1-7).
	1.	Select setting 1, 2, 3 or 4 to iron without steam (L). The Smart
		Steam™ system will automatically turn off and there will not be
		any steam generated.
	2.	To dry iron at higher settings, empty the water from the reservoir
		to prevent steaming.
L	3.	Plug in the iron, wait until iron beeps and digital display shows
		selected setting. If the steam symbol is flashing, press the Steam
		On/Off button to turn off the steam function.

Tip: The steam symbol becomes steady, indicating the steam function is off.

EMPYTING WATER TANK (OPTIONAL)

Note: It is not necessary to empty the water after each use. 1. Unplug the iron and let it cool.

			Note: Steam is automatically turned off between settings 1 and 4.
G			2. Once you select the appropriate fabric setting, wait for iron to
			beep and display selected setting.
			3. Press the surge-of-steam button	to generate a burst of
			steam (H). For best performance, leave an interval of 5 seconds
			between bursts.
X	AUTO	CLEAN	Important: Always stand the iron on its heel rest when powered on
MA
			but not in use.

H

Vertical Steam

Use for removing wrinkles from hanging clothes and drapes.

1.Make sure the water tank is filled to the MAX mark and iron is plugged into electrical outlet.

2.Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be steamed once they are hung.)

3.Press appropriate fabric temperature selector pushbutton to select appropriate setting (between 5 and 7) for your fabric.

4.Hold the iron close to, but not touching, the fabric.

5. Pull the fabric tight in your free hand and pump the surge-of-

steam button as you move the iron over the fabric (J).

X	Important: Always stand the iron on its heel rest when powered
MA	on but not in use.
NA
UA
OT
ELC

J

M

N

30 seconds

P8 minutes

Q

2.To release the water, hold the iron over a sink with the tip pointing down. Water will empty out of the water-fill opening (M).

SPECIAL FEATURES

Language Settings

Your iron has a multilingual digital display that lets you select from English, French and Spanish.

To change the language (N):

1.Press and hold the (-) button for 2 seconds; the digital display shows EN (for English).

2.Press the (-) button again, the display changes to FR (for French).

3.Press the (-) button one more time and the digital display changes to ES (Spanish).

Note: The languages will change in the order listed above.

4.To select the displayed language, press the (+) button or wait 3 seconds after the language is displayed.

3-Way Automatic Shutoff

The automatic shutoff feature in your iron works as follows:

•The iron will shut off after 30 seconds of inactivity if left on its soleplate or tipped over on its side. If left vertically on its heel rest, it will shut off after 8 minutes of inactivity (P) .

•The unit beeps once and the AUTO OFF symbol flashes on the digital display to let you know the iron has stopped heating (Q).

•After a few seconds, the digital display light goes off.

•If you pick up the iron, an internal motion-sensitive detector is activated and the iron starts heating again.

Tip: You might have to move the iron or shake it gently.

•The unit beeps once, the digital display light comes on and the set temperature is displayed again.

13 14