F1000Pub10000002972 4/7/06 12:07 PM Page 4
Product may vary slightly from what is illustrated.
Symbols
Dry
Steam/Blast of Steam
Spray
1.Spray nozzle
2.
3.
4.Steam button
5.Spray button
6.On/auto off indicator light
7.
8.360° pivoting cord
9.
10.Fabric guide
11.Water tank
12.AUTO CLEAN button
13.Soleplate
Surge of Steam
How to Use
This appliance is intended for household use only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system
Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.
FILLING WATER TANK
1. Open the
A
2.Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on
the water tank (B). Do not overfill.
3. Close the
B
4. Plug in the iron. The on indicator light illuminates green (C). Once the iron reaches the selected temperature, the light goes off and stays off during the ironing cycle.
C | Note: If you need to add water while ironing, unplug the iron | |
and follow above steps. | ||
|
Tip: If unsure of a garment's fiber, test a small area (on an inside seam or hem) before ironing.
3-WAY AUTOMATIC SHUTOFF
The automatic shutoff feature in your iron works as follows:
| • Once the iron reaches appropriate temperature, it will turn |
| off after 30 seconds of inactivity if left on its soleplate or |
30 seconds | tipped over on its side. If left vertically on its heel rest, it will |
| shut off after 8 minutes (D). |
D 8 minutes |
|
| • The auto off light starts blinking red to let you know that the |
| iron has stopped heating (E). |
| • As soon as you pick up the iron, it will start heating again. |
E | Wait for iron to reheat completely before resuming |
operation. |
SMART STEAM™ TECHNOLOGY
The Smart Steam™ system automatically produces steam when you turn the
3 | 4 |
