Black & Decker F2100 manual Care and Cleaning, SPECIAL FEATURES Automatic Shutoff in 3 Positions

30 seconds

8 minutes

D

SPECIAL FEATURES

Automatic Shutoff in 3 Positions

•Your iron will automatically turn off after 30 seconds of inactivity if left on its soleplate or on its side. If left vertically on its heel rest, it will turn off after 8 minutes (D).

•The unit beeps six times and the LED indicator light blinks to let you know the iron has shut off.

USING SPRAY
Use to dampen tough wrinkles at any setting.
1.	Be sure the iron is filled with water.
2.	On first use, pump the spray button	several times (H).
IRONING WITHOUT STEAM
1.	Select the Synthetic, Silk or Rayon setting to iron without steam.
H	The Smart Steam™ system will automatically turn off and there will

•Once you pick up the iron, an internal motion-sensitive detector is activated and the iron starts heating again. You might have to move the iron or shake it gently until the LED indicator light stops blinking.

Note: Wait for iron to reheat completely before resuming operation.

Anti-Drip System

The anti-drip system prevents water spotting at low temperatures.

IRONING WITH STEAM

Smart Steam™ Technology

The Smart Steam™ system automatically generates the right amount of steam for the fabric type selected at high temperature settings. Once you select the temperature, the Smart Steam™ technology detects the set temperature and adjusts the steam power accordingly.

Note: At high temperature settings, it is not necessary to hold the steam button for steam ironing. Using steam button will provide an extra powerful burst of steam to help remove tough wrinkles.

Surge of Steam

Use to remove stubborn creases.

not be any steam generated.

2.To dry iron at Wool and Cotton settings, empty the water from the reservoir to prevent steaming.

3.Plug in the iron, select desired fabric setting. The LED indicator light next to the fabric type you selected blinks until it reaches the appropriate temperature.

EMPYTING WATER TANK (OPTIONAL)

Note: It is not necessary to empty the water after each use.

1. Unplug the iron and let it cool.

2. Open the water-fill cover.

3. To release the water, hold the iron over a sink with the tip pointing down. Water will empty out of the water-fill opening (J).

J

Care and Cleaning

This product contains no user-serviceable parts. Refer service to qualified service personnel.

E

F

Vertical Steam

1.With the water tank filled to the MAX mark, set fabric selection dial to appropriate fabric setting. Read garment's label to help you determine fabric type.

Note: Steam is automatically turned off at Synthetic, Silk and Rayon settings (E).

2.Select the desired fabric setting. The LED indicator light next to the fabric type you selected blinks until it reaches the appropriate temperature.

3. Press the surge-of-steam button to generate a burst of steam

(F). For best performance, leave an interval of 5 seconds between bursts.

Important: Always stand the iron on its heel rest when powered on but not in use.

CLEANING OUTSIDE SURFACES

1.Make sure iron is unplugged and has cooled completely.

2.Wipe the soleplate and outer surfaces with a soft cloth dampened with water.

3.Use mild household detergent. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch or discolor the iron.

4.After cleaning, steam iron over an old cloth to remove any residue from the steam vents.

AUTO CLEAN® SYSTEM

1.Fill the water tank well below the MAX line. Plug in the iron.

2.Select Cotton setting and stand the iron on its heel rest.

3.Wait for the LED indicator light to stop blinking.

4.Unplug the iron and hold over a sink with the soleplate facing down.

5. Press and hold the AUTO CLEAN® button. Be careful, as after several seconds, hot water and steam will come out of the steam vents (K). Continue to hold the AUTO CLEAN® button until all the water has emptied. If necessary, rock iron side-to-side and front-to- back.

Use for removing wrinkles from hanging clothes and drapes.

1.Be sure the water tank is filled to the MAX mark.

2.Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be steamed once they are hung.)

	6.	When finished, release the button, stand the iron on its heel rest
K		and plug it in.
	7.	Heat the unit for about 2 minutes to dry out any remaining water.

STORING YOUR IRON

G

5

3.Turn the fabric-select dial to appropriate fabric setting. The LED indicator light next to the fabric type you selected blinks until it reaches the appropriate temperature.

4.Hold the iron close to, but not touching, the fabric.

5.Pull the fabric tight in your free hand and pump the surge-of-steam button as you move the iron over the fabric (G).

Important: Always stand the iron on its heel rest when powered on but not in use.

1. Unplug the iron and allow it to cool.

2. Store vertically on its heel rest to prevent water leaking from the soleplate.

6