Black & Decker F495SA, F499S SERVICE OR REPAIR

Service, if necessary, must be per-
formed by a Black & Decker (U.S.)
Inc., Household Appliance
Company-Owned or Authorized
Service Center. The Service Center
nearest you can usually be found in
the yellow pages of your phone
book under “Appliances-Small-
Repairing.” For your convenience, a
complete listing of our Company-
Owned Service Centers can be
found on pages 14 & 15.
Before shipping or mailing your iron,
empty all water from the iron. Plug
in the cord and heat the iron at the
maximum temperature setting (set-
ting 7). Iron continuously using any
steam setting over an all cotton
cloth for about 5 minutes. Place the
iron on its heel rest and leave it
operating for 7 to 8 minutes. These
steps will help to dry the inside of
the iron.
Turn the iron off, move the
Adjustable Steam Dial to DRY and
be sure the iron is completely cool
before packing for shipment. Pack it
carefully into a sturdy carton with
enough packing material to prevent
damage. The original carton is not
suitable for mailing. Include a note
describing the problem to our
Service Center and be sure to give
your return address. We also sug-
gest that you insure the package for
your protection.
13
SERVICE OR
REPAIR