Black & Decker FP1435 How to Use, Product may vary slightly from what is illustrated, Controls

Product may vary slightly from what is illustrated.

† 1. Continuous flow side chute

Models FP1445, FP1435 (Part# FP1445-01)

† 2. Continuous flow stopper,

How to Use

This product is for household use only.

•Before first use, unpack the product and remove packing material. Handle sharp chopping blade and slice/shred disc carefully.

•Wash all parts except base.

Note: Do not attempt to chop ice in this food processor; it will damage container and dull chopping blade. This unit will not whip cream, beat egg whites to

a desirable volume, grind coffee beans or spices with a high oil content, or slice or shred hard-cooked eggs, marshmallows, or soft cheeses.

Note: When shredding hard cheese, dice the cheese into 1⁄2” cubes and shred no more than 4 oz. at a time.

CONTROLS

HI or LO — When these buttons are pressed, unit runs continuously until OFF button is pressed.

OFF — Processor should always be left in OFF position when unit is not in use.

PULSE — PULSE position must be pressed and held for unit to operate. When released, unit will stop. Use PULSE for short processing tasks, such as chopping nuts, raw meats, or vegetables. This lets you check processed results and control the fineness.

Important: For your protection, this unit has an Interlock system. The processor won't operate unless container is properly locked onto base (see illustration on the base). The tab on cover must be correctly locked into the slot on base. Be sure cover is turned fully into slot toward LOCK until you hear it click into place. Do not attempt to operate unit without container and cover correctly locked in place. Be sure base is on a flat, dry, clean surface before you begin processing.

TO SLICE OR SHRED

Models FP1445, FP1435 (Part# FP1445-02)

†3. Food pusher (Part# FP1445-03)

†4. Food fingers (Part# FP1445-04)

5. Food chute

†6. Cover with continuous food chute

Models FP1445, FP1435 (Part# FP1445-05 )

7. Tab

†8. Slice/shred disc (Part# FP1445-10)

†9. Continuous flow discharge disc

Models FP1445, FP1435 (Part# FP1445-06) †10. Chopping blade (Part# FP1445-07)

11.Hi and Lo speed control

12.Off/Pulse control

13.Center post

14.Base

†15. 8-Cup (1920 ml) container (Part# FP1445-08)

A

B

1.Place container over center post in base with handle at left. Turn container towards base until it drops down into place. Snap container in towards base and be sure the locking tab locks into place (A).

2.To process into a serving/mixing bowl using continuous flow food chute (Models FP1445, FP1435), place disc stem onto center post in container (B) and slip the continuous flow discharge disc onto the stem.

Note: Be sure you have the appropriate side of discharge disc up for leafy or other vegetables. The tabs on the disc should be up for leafy vegetables.

To process directly into included container, place the disc stem onto the center post in the container, then grasp the slice/shred disc by its hub with the (slice or shred) up and push it down onto the disc stem.

†16. Disc stem (Part# FP1445-09)

†17. Storage lid

Model FP1445 (Part# FP1445-11) †Consumer replaceable

3

3.Place food chute/cover onto container so that its tab is facing down towards base. Twist food chute/cover in toward base to LOCK until you hear it click into place.

4.For models FP1445 and FP1435 make sure food stopper is in place.

5.Plug cord into an electrical outlet.

6.Fill food chute with food and position the pusher over food.

4