Black & Decker FP1611SCKT control panel, Polarized Plug, Tamper-Resistantscrew, Electrical Cord

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.

ELECTRICAL CORD

a)A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.

b)Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.

c)If a long detachable power-supply cord or extension cord is used.

1)The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance,

2)If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and

3)The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

Note: If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Product may vary slightly from what is illustrated.

		1
	9
		2
	10	3
		4
		5
	11
		6
	12
		7
		8
† 1.	Food pusher	†10. Chopping blade
† 2.	Food chute/cover	†11. Extra-thin slice/Fine shred disc
† 3.	Slice/Shred disc	†12. Storage lid
† 4.	Disc stem	†Consumer replaceable

†5. 10-cup (2365 ml) container

6.Center post

7.Control panel

8.Base

†9. Dough blade

control panel

1 3

2

1.OFF/Pulse control

2.High and Low speed controls

3.Power indicator light

15 16