Black & Decker gl280 manual Maintenance, Protecting the environment

Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

uRemove the spool and unwind the cutting line, then wind it on neatly again as described above. Replace the spool as instructed.

Maintenance

Your Black & Decker corded/cordless appliance/tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool/appliance care and regular cleaning.

Warning! Before performing any maintenance on corded/ cordless power tools:

uSwitch off and unplug the appliance/tool.

uOr switch off and remove the battery from the appliance/ tool if the appliance/tool has a separate battery pack.

uOr run the battery down completely if it is integral and then switch off.

uUnplug the charger before cleaning it. Your charger does not require any maintenance apart from regular cleaning.

uRegularly clean the ventilation slots in your tool/appliance and charger using a soft brush or dry cloth.

uRegularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.

Protecting the environment

Z Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product zavailable for separate collection.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet

at: www.2helpU.com

Technical data
		GL280	GL301	GL315
		TYPE 2	TYPE 2	TYPE 3
Input voltage	VAC	230	230	230
Power input	W	300	300	320
No-load speed	min-1	10,000	10,000	10,000
Weight	kg	2.2	2.2	2.2

		GL337	GL350
		TYPE 2	TYPE 3
Input voltage	VAC	230	230
Power input	W	320	350
No-load speed	min-1	10,000	10,000
Weight	kg	2.2	2.2

Hand/arm weighted vibration value according to EN 786:

= 4 m/s2 , uncertainty (K) = 1.5 m/s2 ,

10