Using an extension cable
Always use an approved extension cable suitable for the power input of this appliance (see technical data). The extension cable must be suitable for outdoor use and marked accordingly. Up to 30 m of 1.5 mm2
(Original instructions) | ENGLISH |
uTake care against injury from any device fitted for trimming the filament line length. After extending new cutter line always return the machine to its normal operating position before switching on.
uAlways ensure that the ventilation slots are kept clear of debris.
uDo not use the lawn trimmer (edge trimmer), if the cords are damaged or worn.
uKeep extension cords away from cutting elements.
Additional safety instructions for grass trimmers
Warning! Cutting elements continue to rotate after the motor is switched off.
uBe familiar with the controls and the proper use of the appliance.
uBefore use, check the power supply cord and extension cord for signs of damage, ageing and wear. If a cord becomes damaged during use, disconnect the cord from the mains supply immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY.
uDo not use the appliance if the cords are damaged or worn.
uWear stout shoes or boots to protect your feet.
uWear long trousers to protect your legs.
uBefore using the appliance, check that your cutting path is free from sticks, stones, wire and any other obstacles.
uOnly use the appliance in the upright position, with the cutting line near the ground. Never switch the appliance on in any other position.
uMove slowly when using the appliance. Be aware that freshly cut grass is damp and slippery.
uDo not work on steep slopes. Work across the face of slopes, not up and down.
uNever cross gravel paths or roads while the appliance is running.
uNever touch the cutting line while the appliance is running.
uDo not put the appliance down until the cutting line has come to a complete standstill.
uUse only the appropriate type of cutting line. Never use metal cutting line or fishing line.
uBe careful not to touch the line trimming blade.
uTake care to keep the mains cable away from the cutting line. Always be aware of the position of the cable.
uKeep hands and feet away from the cutting line at all times, especially when switching on the motor.
uBefore using the appliance and after any impact, check for signs of wear or damage and repair as necessary.
uNever operate the appliance with damaged guards or without guards in place.
Labels on appliance
The following warning symbols are found on the appliance:
Read the manual prior to operation.
Wear safety glasses or goggles when operating this appliance.
| Wear suitable ear protectors when operating this |
N appliance. | |
E | Always remove the plug from the socket before |
inspecting a damaged cable. Be careful not to | |
use your strimmer if the cable is damaged. | |
| Beware of flying objects. Keep bystanders away |
K from the cutting area. | |
R | Do not expose the appliance to rain or high |
humidity. | |
Directive 2000/14/EC guaranteed sound power.
#This appliance is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.Electrical safety
7
