◆In trimming mode, set the plant protector to position A.

◆In edging mode, set the plant protector to position B or C.

◆When there are no plants near the cutting area, set the plant protector to position D.

MAINTENANCE

Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Before performing any maintenance, switch off and unplug the tool.

◆Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.

◆Regularly clean the cutting line and spool using a soft brush or dry cloth.

◆Regularly use a blunt scraper to remove grass and dirt from the underneath of the guard.

Fitting a new spool of cutting line (fig. K & L) Replacement spools of cutting line are available from your Black & Decker dealer (cat. no. A6441). Complete cassettes containing a spool of cutting line are also available (cat. no. A6442).

◆Unplug the tool.

◆Keep the tabs (21) depressed and remove the spool cover (22) from the housing (23) (fig. K).

◆Remove the empty spool (24) from the spool cover.

◆Remove any dirt and grass from the spool cover and housing.

◆Take the new spool and push it onto the boss in the spool cover. Rotate the spool slightly until it is seated.

◆Unclip the end of one of the cutting lines and guide the line into one of the eyelets (25) (fig. L). The line should protrude approx. 9 cm from the spool cover.

◆Unclip the end of the other cutting line and guide the line into the other eyelet. The line should protrude approx. 9 cm from the spool cover.

E N G L I S H

◆Align the tabs (21) on the spool cover with the holes (26) in the housing (fig. K).

◆Push the cover onto the housing until it snaps securely into place.

If the cutting lines protrude beyond the trimming blade (12), cut them off so that they just reach the blade.

Your Black & Decker grass trimmer uses a specific grade of cutting line to ensure correct auto-feed operation and optimum performance. The use of incorrect

Black & Decker line or the use of other than Black & Decker line may damage the auto- feed mechanism and will void the warranty.

Winding new line onto an empty spool (fig. M, N & P)

You may wind new cutting line onto an empty spool. Replacement packs of cutting line are available from your Black & Decker dealer (cat. no. A6440).

◆Remove the empty spool from the tool as described above.

◆Remove any remaining cutting line from the spool.

◆First wind new line onto the uppermost part of the spool:

-Feed 2 cm of cutting line into one of the slots in the upper section of the spool as shown.

-Wind the cutting line onto the spool in the direction of the arrow. Make sure to wind the line on neatly and in layers. Do not criss-cross.

-When the wound cutting line reaches the recesses (28), cut the line.

-Temporarily park the line in the slots (27) on one side of the spool as shown.

◆Repeat the above procedure for the second cutting line on the lower section of the spool. Park the line in the unused slots (27).

◆Proceed as described above to fit the spool on the tool. Do not forget to release the cutting line from the parking slots (27).

13

GL650_UK.PM5

13

07-11-2000, 15:20

Page 12 Page 14
Page 13
Image 13
Black & Decker GL650 manual Maintenance, Winding new line onto an empty spool fig. M, N & P
Page 12 Page 14

GL650 specifications

The Black & Decker GL650 is a powerful yet user-friendly electric string trimmer designed to make lawn care more efficient and less labor-intensive. This tool is particularly ideal for homeowners who value convenience and performance when it comes to maintaining their gardens and lawns.

One of the key features of the GL650 is its lightweight design. Weighing in at just around 5.5 pounds, it allows for easy handling and reduced fatigue during extended use. This is beneficial for users who may need to trim large areas or carry out maintenance in hard-to-reach spots.

The trimmer is equipped with a 650-watt electric motor that provides robust cutting performance. This motor allows for quick and easy trimming of grass and weeds, providing enough power to tackle tough growth without bogging down. Additionally, its automatic feed spool ensures a continuous supply of trimmer line, eliminating the hassle of manual line adjustments.

Another standout technology is the dual-line capability, which enables the GL650 to deliver a wider cutting path, improving efficiency. With a cutting width of 12 inches, it allows users to cover larger areas in a shorter amount of time. The adjustable handle height and secondary handle provide enhanced ergonomics, allowing users to customize their grip for comfort.

The GL650 also features a rotating head that enables easy transitions from trimming to edging, providing versatility for different lawn care needs. This dual functionality is crucial for homeowners looking to achieve neat edges along sidewalks and garden beds without needing separate tools.

Safety is a priority with the GL650, which includes a protective guard to shield users from debris during operation. Furthermore, the electric motor eliminates the need for gasoline, reducing emissions and making it an eco-friendly choice.

Overall, the Black & Decker GL650 is an excellent choice for anyone seeking an effective and reliable electric string trimmer. Its combination of power, versatility, and ease of use makes it a standout tool in the realm of lawn and garden maintenance. Whether you are an experienced gardener or a novice homeowner, the GL650 is designed to meet your trimming needs with style and efficiency.
Top Page Image Contents