ENGLISH

Electrical safety

This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.

Additional safety instructions for hedgetrimmers

Wear safety glasses or goggles when operating this tool.

Wear gloves when operating this tool.

Wear ear protection when operating this tool.

Immediately disconnect the cable from the mains if it is damaged or cut.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1.Trigger switch

2.Front handle switch

3.Front handle

4.Guard

5.Blade

6.Blade sheath

7.Cable restraint

This hedgetrimmer has the following features for your benefit:

Ergonomically formed handles for comfortable cutting.

Machined blades for improved cutting.

Dual action blades for reduced vibration.

Do not expose the tool to rain or high humidity.

Keep the cable away from the blades while using this tool.

If you have not used a hedgetrimmer before, preferably seek practical instruction by an experienced user in addition to studying this manual.

Never touch the blades while the tool is running.

Never attempt to force the blades to come to a standstill.

Do not put the tool down until the blades have come to a complete standstill.

Regularly check the blades for damage and wear. Do not use the tool when the blades are worn or damaged.

Take care to avoid hard objects (e.g. metal wire, railings) when trimming. Should you accidentally hit any such object, immediately switch the tool off, unplug it and check for any damage.

Should the tool start to vibrate abnormally, immediately switch it off and check for any damage.

If the tool stalls, immediately switch it off. Unplug the tool before attempting to remove any obstructions.

After use, place the blade sheath supplied over the blades. Store the tool, making sure that the blade is not exposed.

Always ensure that all handles and guards are fitted when using the tool. Never attempt to use an incomplete tool or a tool with unauthorised modifications.

Never allow children to use the tool.

Be aware of falling debris when cutting the higher sides of a hedge.

This appliance is not intended for use by young or infirm persons without supervision. Children must be supervised to ensure they do not play with the appliance.

Assembly

Warning! Before assembly, make sure that the tool is switched off and unplugged and that the blade sheath is fitted over the blades.

Fitting the guard (fig. A)

Locate the guard (4) into the mounting bracket (8).

Push the guard into the bracket until it clicks into place.

Warning! Never use the tool without the guard.

Connecting the tool to the mains (fig. B)

Unless the tool is fitted with a mains cable, you will need to connect an extension cable to the power inlet.

Connect the female socket of a suitable extension cable to the power inlet of the tool.

Loop the cable through the cable restraint (7) as shown to prevent the extension cable from becoming detached during use.

Insert the mains plug into a mains outlet.

Warning! The extension cable must be suitable for outdoor use. When using a cable reel, always unwind the cable completely.

Use

Warning! Let the tool work at its own pace. Do not overload.

Carefully guide the cable in order to avoid accidentally cutting it. A good way to control the cable is by putting it over your shoulder.

4

Page 4
Image 4
Black & Decker HT420, 477435-02-PDF1 instruction manual Features, Assembly, Use

477435-02-PDF1, HT420 specifications

The Black & Decker HT420 is a reliable and efficient hedge trimmer that caters to both amateur gardeners and seasoned landscaping professionals. Its design integrates power and precision, making gardening tasks manageable with minimal effort. The HT420 is particularly favored for its lightweight build, allowing users to maneuver it effortlessly during prolonged trimming sessions.

One of its standout features is the powerful 3.0 amp motor that delivers robust performance while cutting through branches and hedges. This motor is designed to provide ample power without being overly cumbersome, which is a significant advantage when tackling tougher jobs. This hedge trimmer can easily handle branches up to 3/4 inch thick, making it suitable for various types of hedges and shrubs.

The HT420 is equipped with dual-action blades, which not only enhance performance but also reduce vibration during operation. This dual-action system results in less fatigue for the user, making it an ideal choice for larger jobs. These hardened steel blades are designed to remain sharp for longer durations, ensuring clean cuts that promote healthy plant growth.

Safety is prioritized in the Black & Decker HT420 with features that promote user protection. It includes a two-handed safety switch that ensures the trimmer cannot be operated with one hand, thus minimizing the risk of accidents. Furthermore, the ergonomic handle design contributes to comfortable operation, facilitating better control during use.

In terms of technology, this hedge trimmer boasts a corded electric design, meaning users never have to worry about battery life or fuel. The 24-inch cutting length allows for efficient trimming of larger areas in less time, making it perfect for residential and small commercial landscaping projects. The corded nature also provides consistent power, eliminating the limitations usually associated with cordless alternatives.

The Black & Decker HT420 is also designed for easy maintenance. The blades can be easily accessed for cleaning, and the overall construction allows for straightforward storage when the job is done. Lightweight yet powerful, this hedge trimmer is a fantastic addition to any gardening toolkit. Whether you are preparing your garden for spring or maintaining your landscape throughout the growing season, the HT420 is engineered to meet your needs with efficiency and reliability.