English
Warning! Steam may escape from the spout.
Warning! This kettle must only be used with the kettle base provided.
Note: Ensure the lid is fitted correctly before use.
Note: Disconnect the kettle from the power supply before filling with water.
Note: Ensure the lid is correctly fitted before use
Note: Allow the appliance to cool before
•Place the kettle base (6) on a suitable flat stable surface.
•Take the kettle to a water outlet.
•To open the lid, press the 2 buttons together & lift. To avoid the danger of burns, never do this when the water is hot
•Fill the kettle with cold water to the desired level.
•To prevent
•Do not fill the kettle beyond the maximum fill mark (4).
Warning! If the kettle is overfilled, boiling water may be ejected from the spout.
•Close the lid (2) and make sure it snaps into place.
•Place the kettle on the kettle base (6).
•Insert the plug into a suitable electrical outlet and push the switch (1) to the on position (I).
•The power on indicator (5) will light.
•The water will start boiling, making a rumbling noise. Do not open the lid when the water is boiling.
•As soon as the water has boiled, the appliance will switch off and the power on indicator (5) will go out.
•Always ensure the kettle has turned off before lifting it from the kettle base.
•To switch the appliance off during boiling, push the On / Off switch (1) the off position (O).
•If you do not want to use the boiled water immediately, the kettle may be left on the base. If you want to bring the water back to boil after a while, push the on / off switch (1) to on again.
•The outer surface of the kettle may become hot when in use
Pouring boiled water
Caution: Insure that the kettle is switched off before removing it from its stand.
•Take the kettle off the base.
•To avoid scalding, tilt the kettle slowly to pour the boiled water.
•After pouring, place the kettle back on the base and remove the plug from the socket.
Cleaning and maintenance
Warning! Before cleaning and maintenance, switch the appliance off, remove the plug from the socket and allow the appliance to cool.
Warning! Do not immerse the appliance, the base, the cord set or the plug in water or any other liquid.
•Wipe the exterior with a damp cloth.
•Do not use scouring pads.
•If necessary, use a mild detergent to remove spots.
•Do not use any abrasive or solvent based cleaner.
•Do not immerse the kettle, base, cord or plug in any liquid.
Technical Data:
| JC200 |
|
|
Input voltage: | |
|
|
Power input: | |
|
|
Weight: | 1kg |
|
|
