![How to Use](/images/new-backgrounds/58955/5895511x1.webp)
How to Use
This appliance is for household use only.
Before first use, wash the interior of the kettle and the scale filter as instructed in the CLEANING section.
BOILING WATER
1. To open the lid, press the lid release switch. The lid pops up (A).
A
2.Fill the kettle to your selected level. Be sure not to exceed the MAX line on the water window (B).
3. To close the lid, push down until it snaps into place.
Important: Never open the lid while water is boiling.
B
4. Always use the base and the kettle on a flat, level surface. Place the kettle onto the 360° swivel base (C) and plug into an electrical wall outlet.
C
5. Press down the I/O (On/Off) switch (D). The indicator light illuminates.
6. Once boiling cycle is finished, unplug the unit.
| Warning: Be careful when opening the lid, as you might get | |
| a splash of hot water. Wait a few minutes for condensation | |
D | to evaporate. After boiling water, the outside of the kettle is | |
hot. Use only the handle to pick it up. Do not grasp kettle | ||
| ||
body with both hands. | ||
SCALE FILTER |
| |
| Always boil water with the scale filter in place just behind | |
| the spout (E). | |
| Lime scale forms over time when water is heated. Though | |
| scale is natural and harmless, it may produce a powdery | |
| substance or | |
| beverages and affect the taste. While the concealed element | |
E | in this kettle is designed to help reduce scale buildup, the | |
filter helps prevent particles from pouring into your beverage. | ||
|
CONCEALED HEATING ELEMENT
This unit has a boil/dry protection safety feature that automatically turns off the kettle and indicator light when boiling finished or when there is no water inside.
Care and Cleaning
CLEANING
1.Before cleaning, be sure the base is unplugged and the unit has cooled completely. Empty any remaining water from the kettle.
2. | Pull out the scale filter for cleaning (F). Wash the filter in |
| warm soapy water and rinse or place it in the utensil holder |
| of the dishwasher. |
3. | Wash the inside of the kettle with soapy water and rinse. |
| NEVER IMMERSE THE UNIT IN WATER OR OTHER LIQUIDS |
F | or place in a dishwasher. |
4. Wipe the exterior of the kettle and base with a damp cloth or sponge and dry.
Note: The concealed element at the bottom of the interior may discolor. This will not affect performance. Do not use abrasive soaps, cleansers, or scouring pads on any part of the unit.
9 | 10 |