SCALE FILTER
D
Always boil water with the scale filter in place just behind the spout (D). Lime scale forms over time when water is heated. Though scale is natural and harmless, it may produce a powdery substance or
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | SOLUTION |
|
|
|
Kettle is not heating. | Kettle is not plugged in. | Check to be sure appliance is |
| Kettle is not properly | plugged into a working outlet, |
| placed on power base. | the I/O (On/Off) button has been |
|
| engaged and the kettle is securely |
|
| placed on the power base. |
Kettle has boiled dry. | Kettle was accidentally | Unplug kettle and allow to fully |
Care and Cleaning
This appliance contains no
1.Before cleaning, be sure the base is unplugged and the kettle has cooled completely. Empty any remaining water from the kettle.
2.Pull out the scale filter for cleaning. Wash the filter in warm soapy water and rinse or place it in the utensil holder of the dishwasher.
3.Wash the inside of the kettle with soapy water and rinse. NEVER IMMERSE THE KETTLE IN WATER OR OTHER LIQUIDS or place in a dishwasher.
4.Wipe the exterior of the kettle and base with a damp cloth or sponge and dry. The concealed heating element at the bottom of the interior may discolor. This will not affect performance. Do not use abrasive soaps, cleansers, or scouring pads.
5.Over time, the kettle may heat up but will not boil, depending on your use and the hardness of the water in your area. When this happens, it is time for descaling. Use a scale/lime remover and follow its manufacturer's directions.
| turned on without water. | cool down before refilling. |
Kettle heats, but does | Appliance may need | Follow directions for |
not boil or works | descaling. | descaling the kettle. |
intermittently. |
|
|
The On (I) button | The kettle is too hot. | Allow the kettle to cool down at |
will not stay on. | demasiado caliente. | least 5 to 10 minutes. Make sure |
|
| there is enough water in the kettle. |
11 | 12 |
