Keep handles and switches dry, clean and free from oil and grease.
20.Repairs
This tool complies with relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user.
Additional safety instructions for angle grinders
Wear safety glasses or goggles when operating this tool.
Wear ear protection when operating this tool.
Wear gloves when operating this tool.
Do not cut or grind light metal with a magnesium content exceeding 80%, since this type of metal is flammable.
Only use grinding and cutting discs and other accessories recommended in this manual. Make sure that the maximum speed of the grinding or cutting disc exceeds the
Do not cut workpieces requiring a maximum depth of cut exceeding that of the cutting disc. Never use the tool without the guard, except for sanding.
Do not exert side pressure on the grinding or cutting disc.
Use this tool only as a hand held tool.
Sanding
Wear a dust mask whenever sanding. Thoroughly remove all dust after sanding. Take special care when sanding paint which is possibly lead based or when sanding some woods and metal which may produce toxic dust:
-Wear a dust mask specifically designed for protection against lead paint dust and fumes and ensure that persons within or entering the work area are also protected.
E N G L I S H
-Do not let children or pregnant women enter the work area.
-Do not eat, drink or smoke in the work area.
-Dispose of dust particles and any other debris safely.
ELECTRICAL SAFETY
The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate.
This tool is double insulated in accordance with EN 50144; therefore no earth wire is required.
Using an extension cable
Always use an approved extension cable suitable for the power input of this tool (see technical data). Before use, inspect the extension cable for signs of damage, wear and ageing. Replace the extension cable if damaged or defective.
When using a cable reel, always unwind the cable completely. Use of an extension cable not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
PACKAGE CONTENTS
The package contains:
1Angle grinder
1Side handle
1Grinding or cutting disc
1Flange set
1
1Instruction manual
Carefully unpack all parts.
OVERVIEW (fig. A)
1.On/off switch
2.Side handle
3.Spindle lock
4.Guard
5.Grinding or cutting disc
13
