14.4, 18 & 24 Volt Cordless Drills
INSTRUCTION MANUAL
Catalog Nos.
PS180S
PSO1800
PS1440
PS2400
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
IF YOU SHOULD HAVE AQUESTION OR EXPERIENCE A PROBLEM WITH YOUR BLACK & DECKER PRODUCT,
CALL 1-800-544-6986
BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., AND
DATE CODE (e.g. 20000130M). IN MOST CASES, ABLACK & DECKER REPRESENTATIVE CAN
RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU HAVE ASUGGESTION OR COMMENT, GIVE
US ACALL. YOUR FEEDBACK IS VITALTO BLACK & DECKER.
KEY INFORMATION YOU SHOULD KNOW:
•Charge battery for 9 hours before first use. For more information see
“CHARGING THE POWER PACK”.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Cat. Nos. PS180S, PSO1800, PS1440, PS2400, PS1800
Form #
GENERAL SAFETY RULES - FOR ALL BATTERY OPERATED TOOLS
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury
SAVE THESE INSTRUCTIONS
WORK AREA
•Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
•Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
•Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
•Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords may create a fire.
•A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
•Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating a power |
tool. Do not use tool while tired or under the influence of drugs, alcohol, or |
•Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool.
SERVICE
•Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.
•When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
SPECIFIC SAFETY RULES
•Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator.
•When working on a ladder or on scaffolding be sure to lay the tool down on its side when not in use. Some tools with large battery packs will stand upright but may be easily knocked over.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.
The label on your tool may include the following symbols. |
| |||||
V | volts | A | amperes | |||
Hz | hertz | W | watts | |||
min | minutes | no | alternating current | |||
|
| direct current | no load speed | |||
|
| |||||
| .......................... | Class II Construction |
|
| ........................ | earthing terminal |
|
|
|
|
| ||
|
|
|
|
| ||
| ........................ | safety alert symbol | .../min | revolutions or | ||
|
|
|
|
|
| reciprocations per minute |
Battery Cap Information
Battery storage and carrying caps are provided for use whenever the battery is out of the tool or charger. Remove cap before placing battery in charger or tool.
Battery Cap
WARNING: Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc. with loose nails, screws, keys, etc. without battery cap. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e. packed in suitcases and carryon luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit.
1 | 2 |
medication. A moment of inattention while operating power tools may result in serious |
personal injury, |
• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your |
hair, clothing , and gloves away from moving parts. Loose clothes, jewelry, or long hair |
can be caught in moving parts. Air vents cover moving parts and should be avoided. |
• Avoid accidental starting. Be sure switch is in the locked or off position before |
inserting battery pack. Carrying tools with your finger on the switch or inserting the battery |
pack into a tool with the switch on invites accidents. |
• Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that |
is left attached to a rotating part of the tool may result in personal injury. |
• Do not overreach. Keep proper footing and balance at all times. Proper footing and |
balance enable better control of the tool in unexpected situations. |
• Use safety equipment. Always wear eye protection. Dust mask, |
hard hat, or hearing protection must be used for appropriate conditions. |
TOOL USE AND CARE
• Use clamps or other practical way to secure and support the workpiece to a stable |
platform. Holding the work by hand or against your body is unstable and may lead to loss of |
control. |
• Do not force tool. Use the correct tool for your application. The correct tool will do the |
job better and safer at the rate for which it is designed. |
• Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with |
3
Torque Adjust Collar
Collier de réglage de couple
Rueda de ajuste del par torsor
Depress for reverse (this side) |
| Depress for forward (other side) |
Enfoncer pour la marche |
| Enfoncer pour la marche avant |
arrière (ce côté) |
| (autre côté) |
Presione para dirección |
| Presione para dirección normal |
reversa o contraria a las |
| o de las manillas del reloj (el |
manillas del reloj (este lado) |
| otro lado) |
|
|
|
4
Trigger Switch
Interrupteur à gâchette
Conmutador tipo gatillo
the switch is dangerous and must be repaired. |
• Disconnect battery pack from tool or place the switch in the locked or off position |
before making any adjustments, changing accessories, or storing the tool. Such |
preventative safety measures reduce the risk of starting the tool accidentally. |
• Store idle tools out of reach of children and other untrained persons. Tools are |
dangerous in the hands of untrained users. |
• When battery pack is not in use, keep it away from other metal objects like: paper |
clips, coins, keys, nails, screws or other small metal objects that can make a |
connection from one terminal to another. Shorting the battery terminals together may |
cause sparks, burns, or a fire. |
• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, |
with sharp cutting edge are less likely to bind and are easier to control. |
• Check for misalignment or binding of moving parts, breakage of parts, and any other |
condition that may affect the tool’s operation. If damaged, have the tool serviced |
before using. Many accidents are caused by poorly maintained tools. |
5 |
6 |
