12

 

 

English

 

 

 

 

 

3

 

GENERAL INFORMATION (FIG.1)

 

 

3.1 Use of the manual

EN

This manual forms an integral part of the appliance and should be

 

 

kept for future reference. Please read it carefully before installing/

using the unit. If the appliance is sold, the Seller must pass on this manual to the new owner along with the appliance.

3.2Delivery

The appliance is delivered partially assembled in a cardboard box. The supply package is illustrated in fig.1.

3.2.1Documentation supplied with the appliance A1 Use and maintenance manual

A2 Safety instructions

A3 Declaration of conformity

3.3Disposing of packaging

The packaging materials are not environmental pollutants but must still be recycled or disposed of in compliance with the relevant legislation in the country of use.

3.4Safety signs

Comply with the instructions provided by the safety signs fitted to the appliance.

Check that they are present and legible; otherwise, fit replacements in the original positions.

E1 sign – Indicates that the appliance must not be disposed of as municipal waste; it may be handed in to the dealer on purchase of a new appliance. The appliance's electrical and electronic parts must not be reused for improper uses since they contain substances which constitute health hazards.

3.4.1Symbols

E2 symbol – Indicates that the appliance is intended for professional use, i.e. for experienced people informed about the relative technical, regulatory and legislative aspects and capable of performing the operations neces- sary for the use and maintenance of the appliance.

E3 symbol – Indicates that the appliance is intended for non-professional (domestic) use.

4TECHNICAL INFORMATION (FIG.1)

4.1Envisaged use

This appliance has been designed for individual use for the cleaning of vehicles, machines, boats, masonry, etc, to remove stubborn dirt using clean water and biodegradable chemical detergents.

Vehicle engines may be washed only if the dirty water is disposed of as per regulations in force.

-  Intake water temperature: see data plate on the appliance.

-  Intake water pressure: below 10 bar.

-  Operating ambient temperature: above 0°C.

The appliance is compliant with the EN 60335-2-79/A1 standard.

4.2Operator

The symbol on the front cover identifies the appliance’s intended operator (professional or non-professional).

4.3Improper use

Use by unskilled persons or those who have not read and under- stood the instructions in the manual is forbidden.

The introduction of inflammable, explosive and toxic liquids into the appliance is prohibited.

Use of the appliance in a potentially inflammable or explosive atmosphere is forbidden.

The use of non-original spare parts and any other spare parts not specifically intended for the model in question is prohibited.

All modifications to the appliance are prohibited. Any modifications made to the appliance shall render the Declaration of Conformity null and void and relieve the manufacturer of all liability under civil and criminal law.

4.4Main components

B2 Lance

B3 Gun with safety catch

B4 Power supply cable with plug

B5 High pressure hose

B6 Detergent tank (on models with this feature)

4.4.1Accessories (where applicable – see fig.1). C1 Nozzle cleaning tool

C2 Rotating nozzle kit

C3 Handle

C4 Brush

C5 Hose reel

4.5Safety devices

Caution - Danger!

Do not tamper with or adjust the safety valve set-

ting.

-Safety valve and pressure limiting valve.

The safety valve is also a pressure limiting valve. When the gun trigger is released, the valve opens and the water recirculates through the pump inlet.

-Safety catch (D): prevents accidental spraying of water.

5INSTALLATION (FIG.2)

5.1Assembly

Caution - Danger!

All installation and assembly operations must be performed with the appliance disconnected from the mains power supply.

The assembly sequence is illustrated in fig.2.

5.2Assembling the rotating nozzle

(For models with this feature)

The rotating nozzle kit delivers greater washing power.

5.3Electrical connection

Caution - Danger!

Check that the electrical supply voltage and frequency (V-Hz) correspond to those specified on the appliance data plate (fig.2). The appliance should only be connected to a mains power supply equipped with an adequate earth connection and a differential security breaker (30 mA) to cut off the electricity supply in the instance of a short circuit.

5.3.1Use of extension cables

Use cables featuring “IPX5” protection level.

The cross-section of the extension cable should be pro- portionate to its length; the longer it is, the greater its cross-section should be. See table I.

5.4Water supply connection

Caution - Danger!

Only clean or filtered water should be used for intake. The delivery of the water intake tap should be equal to that of pump capacity.

Place the appliance as close to the water supply system as possible.

5.4.1Connection points

Water outlet (OUTLET)

n Water inlet with filter (INLET)

5.4.2Connection to the mains water supply

The appliance can be connected directly to the mains drinking water supply only if the supply hose is fitted with a backflow preventer valve as per current regulations in force. Make sure that the hose is at least Ø 13 mm and that it is reinforced.

B1 Adjustable spray nozzle