Keep handles and switches dry, clean and free from oil and grease.
20.Repairs
This tool complies with relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user.
E N G L I S H
ELECTRICAL SAFETY
The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate.
This tool is double insulated in accordance with EN 50144; therefore no earth wire is required.
Additional safety instructions for rotary tools
Wear safety glasses or goggles when operating this tool.
◆Only use Black & Decker accessories recommended for this tool.
◆Never use any worn, cracked or damaged accessories.
◆Hold the tool away from your face when switching on.
◆Keep your fingers away from rotating accessories.
◆Be careful not to accidentally hit any foreign objects in the workpiece.
◆Be aware that accessories may be hot shortly after use.
◆If an accessory jams, switch the tool off and unplug it before attempting to free the accessory.
◆Clamp the workpiece whenever possible, especially when using cutting discs.
◆Wear a dust mask whenever sanding.
◆Thoroughly remove all dust after sanding.
◆Take special care when sanding paint which is possibly lead based or when sanding some woods (e.g. MDF) and metal which may produce toxic dust:
-Wear a dust mask specifically designed for protection against lead paint dust and fumes and ensure that persons within or entering the work area are also protected.
-Do not let children or pregnant women enter the work area.
-Do not eat, drink or smoke in the work area.
-Dispose of dust particles and any other debris safely.
Mains plug replacement (U.K. & Ireland only)
◆Should your mains plug need replacing and you are competent to do this, proceed as instructed below. If you are in doubt, contact an authorised repair agent or a qualified electrician.
◆Disconnect the plug from the supply and remove the fuse from the plug.
◆Cut off the plug and dispose of it safely; a plug with bared copper conductors is dangerous if engaged in a live socket outlet.
◆Only fit 13 Amperes BS1363A approved plugs fitted with the correctly rated fuse (1).
◆The cable wire colours, or a letter, will be marked at the connection points of most good quality plugs. Attach the wires to their respective points in the plug (see above). Brown is for Live (L) (2), blue is for Neutral (N) (4).
◆Before replacing the top cover of the mains plug ensure that the cable restraint (3)
is holding the outer sheath of the cable firmly and that the leads are correctly fixed at the terminal screws.
◆If the plug has a fuse cover, make sure that the fuse cover is fitted. Do not use the plug if the fuse cover is missing or damaged.
Never use a light socket.
7
RT650_UK.PM5 | 7 |
