Reinstalling Permanent Dust Bag
1. Slide clip onto the dust bag (U).
U
2. Insert the bag collar with arrow in the down position. Place collar all the way down into the track guides (V).
3. Secure dust bag in place.
4. Close the canister lid.
V
Cleaning or Replacing Dust Filter
The dust filter is located in the back of the dust bag compartment. 1. Open the canister lid.
TROUBLESHOOTING
Problem | Solution |
Vacuum will not start. | Plug in firmly; press the On/Off |
| |
Low suction or poor pickup. | Replace exhaust filter. |
| Empty dust bag. |
| Check for a clog in the flexible |
| hose or the expandable |
| telescopic chrome wand. |
| Clean or replace dust filter. |
Cord will not rewind. | Clean the power cord. |
It might be dirty or twisted. | Pull out cord, straighten and |
| press retractable cord |
| push button. |
W
Exhaust Filter
2.Grasp dust filter and pull up and out (W).
3.Shake over a trash can.
4.If needed, wash the filter in soap and water.
5.Allow to dry completely before replacing in the vacuum.
6.Insert cleaned dust filter or replace with a new one.
7.Close the canister lid.
The exhaust filter is located in the back of the canister. Replace it at least every 6 months to ensure proper operation. It is not washable.
1. Turn the filter cover clockwise and pull out.
2. Grasp the filter and pull out (X).
3. Insert a new filter.
4. To replace filter cover, align the inserts on the filter cover with the openings on the back of the vacuum canister. Turn counterclockwise until it is secure in place.
X
STORAGE
Unit stores vertically for compact storage (Y).
Y
19 | 20 |
