-7-
English
Using the steam burst button
The steam burst (12) feature can only be used whilst ironing on a high
temperature setting.
• Make sure that there is water in the tank and the temperature control
dial (10) is set to the required steam position.
• Lift the appliance and press the Burst of Steam Button (12) (Fig 3). You
may need to press a few times to activate the pump.
Using the spray button
The spray feature (16) can be used at any temperature setting when
either steam or dry ironing.
• Make sure that there is water in the tank;
• Press the button (16) several times to activate the pump while you
are ironing.
Using the self clean control
The self-clean function (15) must be used before using the appliance
for the first time and then regularly to remove scale.
• Fill the tank to the maximum filling level (11).
• Set the temperature control dial (10) to the max position.
• Plug the appliance in and switch on.
• Allow the appliance to heat up until the Heating / Auto Shut-Off Lamp
(1) switches off and then on again.
• Unplug the appliance. Move the slider lock (5) to the storage position
position so the cord adaptor & power cord are connected to the base,
then take the cordless iron and hold it over the sink.
• Rotate the variable steam / self clean control to the cleaning position
(Fig 4). Hot water and steam will come out of the vents- Impurities and
scale will be washed away.
• Move the iron backwards and forwards while this is happening.
• Release the self-clean (15) button. The control has a spring return mechanism and will shut
off once released.
• Return the Iron to the base.
• Plug the appliance in and switch on.
• Iron an old cloth or towel to dry the sole plate (8).
Hints for optimum use
• Sort the articles to be ironed according to the fabric- Start ironing with the fabrics requiring
the lowest heat setting.
• The appliance can be used as a dry iron even if there is water in the tank. Do not fill the
tank with water if the appliance is to be used as a dry iron for an extended period.
• Avoid ironing over zippers, rivets on jeans etc. as they will scratch the soleplate.
Cleaning and storage
Warning! Before cleaning and storing, unplug the appliance and allow it to cool down.
• Pour out any remaining water after each use by tilting the appliance forward.
• Clean the body with a soft damp cloth.
• Wipe scale and other residues off the soleplate with a damp cloth.
• Store in an upright position.
Figure1: Variable Steam/
Self clean control
Figure3:
Burst and spray
Figure4:
Self clean position
Figure 2:
Steam position