Black Box #22017 manual Overview, Tech Specs, Shelves, Vertical Cable Managers

FEATURES

•Preassembled—we do the work for you!

•Easily adapt to three different EIA rack mounting standards: 19", 23", and 24".

•Pre-drilled bottom can accommodate heavy-duty server shelf.

•Choose movable AC power strip with 6, 8, or 16 outlets.

•Order the optional exhaust fan panel to get air circulation inside the cabinet.

•Available in blue, black, ivory, or gray.

OVERVIEW

Designed with all the features you want, the Elite Series Data Cabinet from Black Box requires no assembly.

Removable side panels install flush—with no handles or knobs to break. Vents on the top front and rear door aid air circulation and help reduce excess heat and humidity.

The cabinet fits into most space-saving arrangements, whether you want the cabinet’s door to swing left or right. The spring-loaded hinges can be easily reversed for right or left hanging.

The cabinet accommodates a wide range of equipment sizes. Adjustable front-to-rear rails can be moved to EIA 19", 23", or 24" rackmounting and are marked every 3U for ease of installation.

10-32 rails are standard; however, an M6 version of the cabinet is also available and separate M6 Mounting Rails are available for 78" and 84" cabinets. The rails, supported top to bottom, don’t require side brackets. Because the sides and corners of the cabinet are open, cable management is easier. Cable management is easy. A cover plate below the rear

door can be removed to reveal a convenient opening for cable entry (or additional air flow). Grommeted bottom edges help prevent accidental damage to your cables.

All cabinet models include a movable AC power strip, which can be mounted in any of the four corners and moved up and down to suit your needs. Choose a cabinet with 6, 8, or 16 outlets. If you need additional outlets, you can add extra power strips at any of the cabinet’s corners.

You can also replace the standard louvered top panel with an optional solid top, or you can order an optional top panel containing three or six powerful exhaust fans. With the help of six fans, you can direct air out the top of your cabinet at a rate of 450 cubic feet per minute. That’s at least twice the rate of most other cabinets. The fans refresh the cabinet’s interior about every four seconds, giving you unparalleled protection against heat buildup near your equipment.

Shelves.

Use the Fixed, Vented Server Shelf in a four-point pattern anywhere in your cabinet. Available in three depths and for either 19" or 23" rails, the shelf can hold up to 150 or 200 pounds of weight, depending on the model you order. This shelf features mounting ears and adjustable side rails that ensure a perfect cabinet fit.

The Heavy-Duty Solid Shelf, which has a weight capacity of 300 pounds, can be used to mount servers or other equipment anywhere in your cabinet.

In addition to mounting ears and lips on its sides, this 3U- high shelf has 2" flanges on its front and back and 1" flanges on its sides. You can mount the shelf with its flanges facing up

or down.

For the bottom of your Elite Series Data Cabinet, you can order our Sliding Server Shelf, which can hold servers that weigh up to 120 pounds.

If you’re looking for more organization from your cabinet, then order the Sliding Server Shelf with Fins. Use it to separate smaller components into two or three compart- ments. The shelf comes with four adjustable fins and a cable management bar.

You can use a single center fin to create two 8.54" wide compartments in the shelf. Or you can use two center fins to create three compartments. The fins, along with the cable management bar, can be removed if you want to use the shelf to store even larger items.

The sliding shelf, which can be used anywhere in your Elite Cabinet, mounts to all four upright rails. It supports up to 110 pounds of weight.

We also offer a Rackmount, Vented, 4-Point Shelf that’s ideal for harsh environments where ventilation is required. Available in both fixed and sliding models for 19" and 23" rails, the 24" deep shelf supports up to 50 pounds of equipment. The included brackets adjust from 20" to 29".

Vertical Cable Managers.

For maximum organization of cables leading to equipment stored in your Elite Cabinet, order a Vertical Cable Manager.

Available in three heights, this rugged, steel unit features a 2.35" wide by 3.5" deep swing-out cover for your cable bundles as well as clip-on cable retainer rings and receptacles.

Designed to be attached to the outside of the Elite Cabinet’s vertical mounting rail, the Vertical Cable Manager can be used on the cabinet’s left or right side to route cables neatly along the rail.

TECH SPECS

Frame — 16-gauge steel

Size —

525056–525059: 30"H x 29"W x 30"D (76.2 x 73.7 x 76.2 cm);

525060–525063: 48"H x 29"W x 30"D (121.9 x 73.7 x 76.2 cm);

525066–525069: 60"H x 29"W x 30"D (152.4 x 73.7 x 76.2 cm);

525070–525073: 72"H x 29"W x 30"D (182.9 x 73.7 x 76.2 cm);

525074–525077: 78"H x 29"W x 30"D (198.1 x 73.7 x 76.2 cm);

525078–525081: 84"H x 29"W x 30"D (213.4 x 73.7 x 76.2 cm);

536000–536003: 84"H x 29"W x 36"D (213.4 x 73.7 x 91.4 cm)

Weight —

525056–525059: 100 lb. (45.4 kg);

525060–525063: 125 lb. (56.7 kg);

525066–525069: 150 lb. (68 kg);

525070–525073: 200 lb. (90.7 kg);

525074–525077: 250 lb. (113.4 kg);

525078–525081: 350 lb. (158.8 kg);

536000–536003: 373 lb. (169.2 kg)

6/4/2007	724-746-5500
#22017

blackbox.com 2 of 3