![](/images/new-backgrounds/1138658/13865827x1.webp)
Chapter 3: Installation/Chapter 4: Operation
2.You’ll also need to connect the Compact Video Splitter’s input connector to the VGA source. Use an HD15
3.Connect the included power supply cord’s barrel connector to the barrel connector receptacle on the Compact Video Splitter. Then plug the other end of the power cord into an AC outlet.
4.Operation
Once the Compact Video Splitter is installed, it operates unattended. The splitter has two
•The Active LED lights when there is a VGA signal at the input port.
•The Power LED lights when the Compact Video Splitter is powered by the
Page 14 |