Black Box Elite Cabinets Grounding Kit manual Chapter, Whats included, flat steel washers

Chapter

FebruaryECGK2010

MT1000A-85-R4

Elite™ Cabinets Grounding Kit

Ensure safety and uptime with this grounding kit that works with Elite Cabinets.

NOTE: Additional grounding wires may be needed depending on cabinet configuration. Recommended use is with a grounding bar.

What's included

•(5) 24" quick-disconnect jumper wires

•(1) 48" quick-disconnect jumper wire (used in 48" deep cabinets)

•(12) M6 Keps® nuts

•(24) 10-32 Keps nuts

•(12) flat steel washers

Each cable assembly:

•(2) ring terminals

•(1) male quick-connect terminal

•(1) female quick-connect terminal

Grounding wire:

12 AWG, ground wire (green) Wire legend:

CSA TEW 105°C 600V LL85687 12AWG FT1 -F- ROHS REACH

©Copyright 2013. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box® and the Double Diamond logo are registered trademarks, and Elite is a trademark, of BB Technologies, Inc. Keps is a registered trademark of Illinois Tool Works, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.

ECGK, rev. 1

Customer

Support

Information

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com