Black Box Hardened VDSL Ethernet Extender, LB303A manual Connecting to Power, 12VDC DC Jack

Hardened VDSL Ethernet Extender

Connecting to Power

Redundant DC Terminal Block Power Inputs or 12VDC DC Jack:

12VDC DC Jack

Step 1: Connect the supplied AC to DC power adapter to the receptacle on the topside of the Hardened VDSL Ethernet Extender.

Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into a standard AC outlet with the appropriate AC voltage.

Redundant DC Terminal Block Power Inputs

There are two pairs of power inputs can be used to power up this device. You only need to have one power input connected to run the Hardened VDSL Ethernet Extender.

Step 1: Connect the DC power cord to the plug-able terminal block on the Hardened VDSL Ethernet Extender, and then plug it into a standard DC outlet.

Step 2: Disconnect the power cord if you want to shut down the

Hardened VDSL Ethernet Extender.

Power Input Assignment

Power1		12VDC	DC Jack
Power2	＋	12-30VDC
	－	Power Ground
Power3	＋	12-30VDC	Terminal Block
	－	Power Ground
		Earth Ground
DIP Switch Assignment
Loc	The device operates in local mode
Rmt	The device operates in remote mode

11